Table of Contents
Advertisement
Access Point Models
Access Point Models
The model numbers (or part numbers) and configuration for the Cisco Aironet 1540 Series outdoor
access points are described in
Table 1-1
Model (or part number)
AIR-AP1542I-x-K9
AIR-AP1542D-x-K9
Regulatory Domains
The "-x" in the 1540 model numbers represent the domain. For example, in AIR-AP1542I-x-K9, the -x
represents a regulatory domain for a specific country. For specific regulatory domains supported by each
1540 series access point model, refer to the Wireless LAN Compliance Status at the following URL:
http://www.cisco.com/go/aironet/compliance
Cisco Aironet 1540 Series Outdoor Access Point Hardware Installation Guide
1-2
Table
1-1.
1540 Series Access Points Model Numbers and Descriptions
Configuration
The AP1542I has integrated omni antennas and
contains a 2.4 GHz and a 5 GHz radio with an
option to configure in centralized, Flexconnect,
Mobility Express, or mesh mode. It can also
operate as a relay node for other access points that
are not directly connected to a wired network.
This model can be mounted vertically, on a wall or
pole, to provide 180 degree coverage; or can be
mounted horizontally on a ceiling, to provide 360
degree coverage.
The AP1542D has integrated directional antennas
and contains a 2.4 GHz and a 5 GHz radio with an
option to configure in centralized, Flexconnect, or
mesh mode. It can also operate as a relay node for
other access points that are not directly connected
to a wired network.
This model can be mounted vertically, on a wall or
pole, to provide a directed 90 degree coverage.
Chapter 1
Overview
Hide quick links:
Advertisement
Table of Contents
