Getting Started
Product Overview
Cisco RV315W Broadband Wireless VPN Router Administration Guide
POWER
•
•
SYS
•
•
•
•
•
WAN0
•
•
•
WAN1
If the WAN1/LAN0 port on the back panel is set to a secondary
WAN interface (WAN1):
•
•
•
LAN0
If the WAN1/LAN0 port on the back panel is set to an additional
LAN interface (LAN0):
•
•
•
Solid green when the RV315W is powered on and is
operating normally.
Off when the RV315W is powered off or the power has
problems.
Solid green when the RV315W is connected to the Internet
through your cable or DSL modem.
Flashes green when the RV315W is attempting to connect
to the Internet, the RV315W cannot connect to the Internet,
or the system is upgrading the firmware.
Solid red when the system has problems.
Flashes red when the system is overloaded, such as the
CPU utilization or the memory utilization exceeds the
limitation.
Off when there is no Internet connection.
Solid green when the RV315W is connected to the Internet
through the WAN0 port, but there is no traffic over this port.
Flashes green when the RV315W is sending or receiving
data over the WAN0 port.
Off when the WAN0 port has no connection.
Solid green when the RV315W is connected to the Internet
through the WAN1 port, but there is no traffic over this port.
Flashes green when the RV315W is sending or receiving
data over the WAN1 port.
Off when the WAN1 port has no connection.
Solid green when the RV315W is connected to a device
through the LAN0 port, but there is no traffic over this port.
Flashes green when the RV315W is sending or receiving
data over the LAN0 port.
Off when the LAN0 port has no connection.
1
6