Cisco RV315W Administration Manual page 21
Broadband wireless vpn router
Hide thumbs
Also See for RV315W:
- Administration manual (109 pages) ,
- Datasheet (9 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Using the Setup Wizard
Configuring WAN Connection
STEP 3
STEP 4
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Choose WAN0 or WAN1 (only available when the WAN1/LAN0 port on the back
panel is set to a secondary WAN port) from the WAN Interface drop-down menu
to connect to the Internet.
Choose a proper network addressing method from the Internet Connection Type
drop-down menu and specify the corresponding settings.
The following table provides the configuration instruction for each Internet
connection type. Confirm that you have proper network information from your ISP
or a peer router to configure the RV315W to access the Internet.
Internet
Configuration
Connection
Type
DHCP
Connection type often used with cable modems. Choose this
option if your ISP dynamically assigns an IP address on
connection.
Static IP
Choose this option if your ISP provides you with a static
(permanent) IP address and does not assign it dynamically.
Use the corresponding information from your ISP to complete
the following fields:
•
IP Address: Enter the IP address of the WAN port that
can be accessible from the Internet.
•
Subnet Mask: Enter the IP address of the subnet mask.
•
Default Gateway: Enter the IP address of default
gateway.
•
Primary DNS Server: DNS servers map Internet
domain names to IP addresses. Enter the IP address of
the primary DNS server. You can get the DNS server
address from your ISP.
•
Secondary DNS Server: (Optional) Enter the IP
address of the secondary DNS server.
2
18
Advertisement
Table of Contents
