Cisco Cat4K NDPP ST
EDCS-1228241
S
ECURITY
1
The Security Target contains the following sections:
Security Target Introduction [Section 1]
Conformance Claims [Section 2]
Security Problem Definition [Section 3]
Security Objectives [Section 4]
IT Security Requirements [Section 5]
TOE Summary Specification [Section 6]
Rationale [Section 7]
The structure and content of this ST comply with the requirements specified in the
Common Criteria (CC), Part 1, Annex A, and Part 3, Chapter 4.
1.1
Security Target and TOE Identification
This section provides information needed to identify and control this ST and its TOE.
ST Title
ST Version
Publication Date
ST Author
Developer of the TOE
TOE Reference
TOE Hardware Models
TOE Software Version
Keywords
1.2
Acronyms and Abbreviations
The following acronyms and abbreviations are used in this Security Target:
Acronyms /
Abbreviations
AAA
Administration, Authorization, and Accounting
ACL
Access Control List
AES
Advanced Encryption Standard
BGP
Border Gateway Protocol. An exterior gateway protocol. It performs routing
between multiple autonomous systems and exchanges routing and reachability
information with other BGP systems.
T
I
ARGET
NTRODUCTION
Table 1 ST and TOE Identification
Cisco Catalyst 4500 Series Switches (4503-E, 4506-E, 4507R+E, 4510R+E,
4500X and 4500X-F) Running IOS-XE 3.5.2E Security Target
1.0
11 March 2014
Cisco Systems, Inc.
Cisco Systems, Inc.
Cisco Catalyst 4500 Series Switches (4503-E, 4506-E, 4507R+E, 4510R+E,
4500X and 4500X-F) running IOS-XE 3.5.2E
Cisco Catalyst 4500 Series Switches (4503-E, 4506-E, 4507R+E, 4510R+E,
4500X and 4500X-F), including one or more Supervisor cards and one or
more of the line cards as identified in Table 3
IOS XE 3.5.2E
Audit, Authentication, Encryption, Information Flow, Protection, Switch,
Traffic
Table 2 Acronyms
Definition
6
11 March 2014