Energywise (Interface Configuration) - Cisco Catalyst 3850 Command Reference Manual
Energywise version 2.8 cisco ios
Hide thumbs
Also See for Catalyst 3850:
- Hardware installation manual (146 pages) ,
- Manual (120 pages) ,
- Deployment manual (54 pages)
Table of Contents
Advertisement
energywise (interface configuration)
energywise (interface configuration)
To configure EnergyWise on the domain member port, use the energywise interface configuration command.
To disable EnergyWise and to remove the EnergyWise configuration, use the no form of this command.
energywise [activitycheck| allow query set| importance importance | keywords word ,word ...| level level
| [recurrence importance importance | {at minute hour day_of_month month day_of_week| time-range
time-range-name }]| name name | role role ]
no energywise [activitycheck| allow query set| importance importance | keywords word word ...| level
level | [recurrence importance importance | {at minute hour day_of_month month day_of_week| time-range
time-range-name }]| name name | role role ]
Syntax Description
activitycheck
allow query set
importance importance
keywords word, word,...
level level
Cisco EnergyWise Cisco IOS Command Reference for Catalyst 3850 Switches, EnergyWise Version 2.8
10
(Optional) Configures the domain member to wait until a Cisco IP phone connected
to a PoE port is not sending or receiving traffic before the domain member powers
off the port.
Note
The domain member cannot determine if the IP phone is in the hold
state.
(Optional) Configures the interface to respond to a query changing the power level
and the EnergyWise attributes if the interface receives a query from the
management station or another domain member.
(Optional) Sets the importance of the port. The range is from 1 to 100.
(Optional) Assigns at least one keyword for the port.
When assigning multiple keywords, separate the keywords with commas, and do
not use spaces between keywords.
• You can enter alphanumeric characters and symbols, such as #, (, $, !, and
&.
• Do not enter an asterisk (*) or a space between the characters or symbols.
(Optional) Sets the power level of the port.
The range is from 0 and 10.
• To power off the endpoint, enter 0
• To power on the endpoint:
◦ If it is a PoE endpoint, enter 10.
◦ If it is not a PoE endpoint, enter a power level from 1 to 10. The
endpoint determines the appropriate action.
EnergyWise Commands
OL-32343-01
Advertisement
Table of Contents
