Clear Energywise; Energywise Commands - Cisco Catalyst 3850 Command Reference Manual
Energywise version 2.8 cisco ios
Hide thumbs
Also See for Catalyst 3850:
- Hardware installation manual (146 pages) ,
- Manual (120 pages) ,
- Deployment manual (54 pages)
Table of Contents
Advertisement
clear energywise
clear energywise
To delete the discovered domain member neighbors and IP endpoints from the EnergyWise database, use the
clear energywise privileged EXEC command.
clear energywise {endpoints [ all | cached ] | neighbors}
Syntax Description
endpoints
neighbors
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3E
Usage Guidelines
To check that you have deleted neighbors and endpoints from the database, use the show energywise neighbors
privileged EXEC command.
If you enter the clear energywise neighbors command, all non static neighbors are cleared and the neighbor
table is updated. If the command is not used and an entry becomes obsolete, the entry is removed only during
the next automatic update, which happens approximately every 30 minutes.
If you statically add a neighbor, the clear energywise neighbors privileged EXEC command does not
Note
affect it.
Cisco EnergyWise Cisco IOS Command Reference for Catalyst 3850 Switches, EnergyWise Version 2.8
2
Clears the connected EnergyWise-capable IP endpoints. PoE devices that
do not run the agent are not deleted.
• (Optional) all—Removes all operational and nonoperational (cached)
EnergyWise endpoints.
• (Optional) cached— Removes only nonoperational (cached)
EnergyWise endpoints.
Deletes the discovered domain member neighbors from the EnergyWise
database. After the discovered domain members are deleted the local domain
member immediately begins to rediscover any connected neighbors.
First EW Version
Modification
2.8
This command was introduced.
EnergyWise Commands
OL-32343-01
Advertisement
Table of Contents
