Operation; Using Useful Functions; Using The Alarm Functions - Yamaha TSX-120 Owner's Manual
Hide thumbs
Also See for TSX-120:
- Owner's manual (56 pages) ,
- Service manual (87 pages) ,
- Owner's manual (32 pages)
Table of Contents
Advertisement
Available languages
Available languages
OPERATION
Using the alarm functions
The unit has the dual alarm function. Each alarm time
always appears on the right/left sides of the clock on the
front panel display. When the alarm is set to on, the alarm
indicator and time light up.
You can set the different music to the alarm from what
you listen to during the setting.
Note
This operation can be performed only with the buttons on the top
of the unit.
■ Setting the alarm time and sound
Note
To cancel the alarm function setting during the operations, press
SETUP1/SETUP2. The alarm is not set.
1
Start setting ALARM1/ALARM2.
When you want to set the alarm to ALARM1, set on
SETUP1, and SETUP2 is for ALARM2.
USING USEFUL FUNCTIONS
2
3
Set the alarm time.
1 While setting the alarm function, the alarm
indicator blinks.
2 The item you are setting also blinks.
3 The > mark on the right side means that you have
other menu items on the following screens. You
can go to the next menu item setting by pressing
ENTER.
Select and set TYPE → BEEP →
SOURCE → VOLUME.
1 After setting the alarm time, select the alarm type
from BEEP/BEEP+MUSIC/MUSIC.
– BEEP: beep sound only
– BEEP+MUSIC: beep sound and music selected
in an input source, iPod/FM
– MUSIC: music only
If you set TYPE to BEEP+MUSIC, you can play
back the desired music in an input source, iPod/
FM and beep sound together at the time you set.
The music volume gradually increases to wake
you up comfortably, and then the beep sound
plays back at the time you set.
5
En
Advertisement
Chapters
Table of Contents
