Table of Contents
Advertisement
VISTA-128BP/VISTA-250BP Installation and Setup Guide
Daily Open/Close Schedules
Each partition can be assigned one daily open/close
schedule, plus a holiday schedule. Temporary
schedules are programmed separately, using the #81
Temporary Schedule Menu Mode. To program
additional open/close schedules, see Time-Driven
Events Programming later in this section for the
procedure.
Part
Mon
Op
Cl
1
2
3...8
Open/Close Schedule Programming
After entering Scheduling Menu Mode, press [0] until the "O/C Schedules?" prompt appears.
PROMPT
O/C Schedules ?
1 = YES 0 = NO
0
Partition # ?
01-08, 00 = Quit 01
Mon P1 OP WIND.?
00:00 00:00
00
Mon P1 CL WIND.?
00:00 00:00
00
Tue P1 OP WIND.?
00:00 00:00
00
Hol P1 OP WIND.?
00:00 00:00
00
Quit ?
1 = YES 0 = NO
0
Holiday Schedules
A holiday schedule overrides the regular daily open/close schedule on the programmed holidays throughout the year.
The system provides up to 16 holidays that can be assigned for the system. Each holiday can be assigned to any
combination of partitions. List the desired holidays in a Month/Day format on the worksheet. Check the partitions for
which these holidays apply.
6-6
WWW.DIYALARMFORUM.COM
Tues
Wed
Op
Cl
Op
Cl
EXPLANATION
Enter 1 to program opening and closing schedules.
Enter the appropriate partition number for which the following open/close schedules will apply.
Enter 00 + [✳] at the "Partition #?" prompt to quit open/close schedules programming and display the "Quit ?"
prompt.
Enter the time window number 01-20 for the displayed day's opening schedule beginning with Monday.
Enter 00 if no schedule is desired for a particular day. As the number is keyed in, the actual time that has been
stored for that window number is displayed as a programming aid.
Press [✳] to accept the entry.
Enter the time window number for the displayed day's closing schedule. As the number is keyed in, the actual
time that has been stored for the window number is displayed.
Press the [✳] key to accept the entry.
The keypad now prompts for Tuesday's open/close schedule. Follow the procedure for Monday's prompts.
When the last day of the week has been programmed, the holiday opening and closing window prompts are
displayed.
Repeat the procedure for the holiday opening and closing time windows.
Press the [✳] key to accept the entry.
When the entries are completed, the "Partition #?" prompt is displayed again. Repeat this procedure for each
partition in the system.
Enter 0 at the "Quit ?" prompt to return to the main menu choices and continue programming.
Enter 1 to quit Scheduling Menu Mode.
WWW.DIYALARMFORUM.COM
Open/Close Schedule Worksheet
The following worksheet is an example of the
worksheet found in the Programming Guide. Write the
previously defined time window numbers for open and
close for each partition.
Thur
Fri
Op
Cl
Op
Cl
Sat
Sun
Op
Cl
Op
Cl
Op
Hol
Cl
- Quick Links:
- Section 4: Programming
- Program Modes
Hide quick links:
Advertisement
Table of Contents
