Card-Level Leds On The Channelized (Stm-1/Oc-3) Line Card - Cisco ASR 5000 Series Installation Manual
Hide thumbs
Also See for ASR 5000 Series:
- Product overview (992 pages) ,
- Administration manual (509 pages) ,
- Thresholding configuration manual (163 pages)
Table of Contents
Advertisement
▀ Verifying the Installation
Table 72.
Alarm/Link States for Optical (ATM) Line Card
LED
LED Color
Red Alarm
Red (ON)
OFF
Yellow Alarm
Yellow (ON)
OFF
Link
Green (On)
Yellow (On)
OFF
Card-Level LEDs on the Channelized (STM-1/OC-3) Line Card
Each Channelized line card (CLC2) is equipped with card-level status LEDs:
Run/Fail
Active
Standby
The location of these LEDs is displayed in the figure below. The various states are described in the following three
tables.
▄ ASR 5000 Installation Guide
178
Description
Illuminates when the port is in a fault condition, such as LOS or LOF.
Off when there is no alarm for this port.
Illuminates when the port is receiving a signal indicating a problem at the remote end, for
example, RDI.
Off when there is no alarm for this port.
Illuminates Green when a fiber optic cable is plugged into the port and the receive signal
is detected by the SFP module.
Illuminates Yellow when an SFP module is plugged into the port.
Off indicates that there is no SFP module plugged into the port.
Applying Power and Verifying the Installation
Advertisement
Table of Contents
