Factory Setting; How To Turn On The Factory Settings; What Is The Factory Settings - Panasonic SDR-SW21PC Service Manual
Hide thumbs
Also See for SDR-SW21PC:
- Operating instructions manual (120 pages) ,
- Service manual (51 pages)
Table of Contents
Advertisement
12 Factory Setting
12.1. HOW TO TURN ON THE FACTORY SETTINGS?
1. Set the mode dial to the Motion picture recording mode.
2. Press three buttons ("Cursor button [Right>] of Cursor" button, "Delete" button and "Record" button) simultaneously for 3 sec-
onds or more.
3. Beep tone is generated and then the shutter sound is generated.
4. When "END" appears on the display, the Factory Setting is completed.
5. Set the mode dial to the OFF position to close the Factory Setting.
12.2. WHAT IS THE FACTORY SETTINGS?
The factory settings clean up and/or refresh the following settings.
1. The OSD MENU setting data.
2. Deletion only for all scene files in a card and format of the MPEG2 file system area.
3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)
4. Clear the mechanism lock information.
5. Clear the service mode information contents.
The setting position of factory settings:
Name
Mode dial
Setting position
OFF
40
Advertisement
Chapters
Table of Contents
