Table of Contents
Advertisement
1
Welcome
Thank you for choosing the Cisco C690 Email Security
Appliance (Cisco C690).
The Cisco C690 appliance is designed to serve as your SMTP
email gateway at your network perimeter—that is, the first
appliance with an IP address that is directly accessible to the
Internet for sending and receiving email. Many of the features
(including reputation filtering, data loss prevention, content
scanning, spam detection, and virus protection) require you to
install the Cisco appliance into your existing network
infrastructure.
This guide describes how to physically install your Cisco C690
appliance and use the System Setup Wizard to configure basic
settings.
2
Before You Begin
Before you begin the installation, make sure that you have the
items needed.The following items are included with the
Cisco C690 Email Security Appliance:
• Slide rail kit
• Power cables (2)
• Console cable
• A card listing the location of online documentation for your
appliance.
Two locking keys are included with the locking
Note
faceplate version of the Cisco C690 appliance. Keep
these keys safe because you will need the 4-digit key
code to replace missing keys.
You will need to provide the following items yourself:
• Rack cabinet enclosure (if rack-mounting the appliance)
• Phillips-head screwdriver for assembling rails
• 10/100/1000 Base-TX TCP/IP LAN
2
Advertisement
Table of Contents
