Brother DCPJ525W Service Manual page 355
Hide thumbs
Also See for DCPJ525W:
- Basic user's manual (100 pages) ,
- Quick setup manual (32 pages) ,
- User manual (85 pages)
Table of Contents
Advertisement
(7) Press the Stop/Exit key to return the machine to the initial stage of the maintenance mode.
Notes:
• To cancel this operation and return the machine to the initial stage of the
maintenance mode during the above procedure, press the Stop/Exit key.
• If there is a pause of more than one minute after a single-digit number is entered for
double-digit assurance mode switch numbers, the machine will automatically
return to the initial stage of the maintenance mode.
• Initializing the EEPROM with Function code 01 or 91 initializes the AMS switch
settings.
Selector
No.
Prevention of stains on back side of
1
leading edge of paper in borderless
printing
Ink stains reduction mode in printing
2
received faxes
3
Protection of platen from no-paper
printing to prevent stains
(Functional restriction on the paper
width sensor)
4
Assurance print 1
5
(Printing with black and cyan inks in
monochrome copy)
Assurance print 2
(Printing with black and cyan inks in
6
monochrome FAX reception and in list
output)
Workaround for false jam detection
7
(Functional restriction on the paper
8
width sensor)
• Selector 1: Prevention of stains on back side of leading edge of paper in borderless printing
Setting this selector to "1" reduces the protruding amount of the leading edge of recording
paper to the platen groove to minimize stains that could be caused by ink mist on the back
side of the leading edge. Enabling this function reduces the throughput than disabling it.
• Selector 2: Ink stains reduction mode in printing received faxes
When the print density of received faxes is high in printing, ink can adhere to the paper
feed related rollers, resulting in stains on printed paper. If this happens, enable this ink
stains reduction mode to lower the print resolution for reducing the adherence of ink.
AMS01
(Printing assurance 1)
Function
5-71
Setting and Specifications
0: Disable (default)
0: Disable (default)
No. 3 4
0 0 : Enable (Determine the sensor
function depending upon the print
resolution selected) (default)
0 1 : Enable (Detect the leading edge
plus right and left edges of paper)
1 0 : Enable (Detect the leading edge
of paper)
1 1 : Disable (No paper detection)
0: Disable (default)
0: Disable (default)
No. 7 8
0 0 : Detect both the leading edge and
width of paper (default)
0 1 : Detect both the leading edge and
width of paper
1 0 : Detect only the leading edge of
paper
1 1 : No detection
1: Enable
1: Enable
1: Enable
1: Enable
Confidential
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
