Equipment Error Code Indication (Function Code 82) (User-Accessible); Assurance Mode Switch Setting (Function Code 88) (User-Accessible) - Brother DCPJ525W Service Manual
Hide thumbs
Also See for DCPJ525W:
- Basic user's manual (100 pages) ,
- Quick setup manual (32 pages) ,
- User manual (85 pages)
Table of Contents
Advertisement
1.4.32 Equipment Error Code Indication (Function code 82) (User-accessible)
Function
This function displays an error code of the last error on the LCD.
Operating Procedure
(1) Press the 8 and 2 keys in this order in the initial stage of the maintenance mode.
The LCD shows the "MACHINE ERROR X X."
(2) To stop this operation and return the machine to the initial stage of the maintenance mode,
press the Stop/Exit key.
1.4.33 Assurance Mode Switch Setting (Function code 88) (User-accessible)
Function
The machine incorporates five assurance mode switches (AMS01 through AMS05) that are
firmware switches just as the ones described in
When the machine does not function normally because the usage environments or operating
conditions are not usual, the assurance mode switches provide workarounds to make the
machine usable by changing the machine settings to untypical ones.
The user is allowed to access the assurance mode switches under the guidance of service
personnel (e.g., by telephone).
The details about AMS01 through AMS05 are described on the following pages.
Operating Procedure
(1) Press the 8 key twice in the initial stage of the maintenance mode.
The machine displays "AMS00" on the LCD and becomes ready to accept an assurance
mode switch number.
(2) Enter the desired number from the assurance mode switch numbers (01 through 05).
The following appears on the LCD:
(3) Use the
(4) Enter the desired number (0 or 1) using the 0 and 1 keys.
(5) Press the OK key. This operation saves the newly entered selector values onto the
EEPROM and readies the machine for accepting an assurance mode switch number.
(6) Repeat steps (2) through (5) until the modification for the desired assurance mode switches
is completed.
Selector 1
Selector 8
↓
AMSXX = 0 0 0 0 0 0 0 0
and
keys to move the cursor to the selector position to be modified.
Section 1.4.6
↓
5-70
in this chapter.
Confidential
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
