Adjustment Of Touch Panel (Function Code 78) - Brother DCPJ525W Service Manual
Hide thumbs
Also See for DCPJ525W:
- Basic user's manual (100 pages) ,
- Quick setup manual (32 pages) ,
- User manual (85 pages)
Table of Contents
Advertisement
1.4.30 Adjustment of Touch Panel (Function code 78)
Function
This function adjusts the detection area on the touch panel.
NOTE: The adjustment procedure requires a stylus with a thin tip. A commercially available
stylus designed for electronic dictionaries or personal digital assistance (PDA) can be used. If
you do not have it on hand, order the "TOUCH PEN" from the Brother's parts list.
Operating Procedure
(1) Press the 7 and 8 keys in this order in the initial stage of the maintenance mode.
The adjustment screens shown below appear on the LCD.
(2) Touch the symbols on the touch panel with a stylus in the order of top-left, bottom-left,
bottom-right, top-right, and the center. After a symbol touched disappears, touch the next
one.
NOTE: Do not use tools other than a pen designed for touch panels. Especially, never use a
pointed one, e.g., a screwdriver. Using such a tool damages the touch panel.
NOTE: Do not touch the touch panel with fingers. The contact area of a finger is too large
to adjust the touch panel precisely.
NOTE: If no keys are pressed for one minute in the above procedure or you press the Stop/
Exit key, the machine stops the procedure and returns to the initial stage of the
maintenance mode.
5-63
Confidential
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
