Brother DCPJ525W Service Manual page 117
Hide thumbs
Also See for DCPJ525W:
- Basic user's manual (100 pages) ,
- Quick setup manual (32 pages) ,
- User manual (85 pages)
Table of Contents
Advertisement
Separated lines over the whole page
Step
1
Inclination of head not adjusted
2
Head calibration data not written
3
Paper feeding correction value not
updated
4
PF encoder disc stained or
scratched
5
Print head defective
6
Main PCB defective
Overlapping lines at the trailing edge of the recording paper
Step
1
Paper feeding correction value not
updated
2
PF encoder disc stained or
scratched
3
Engine unit defective
4
Main PCB defective
User Check
- Perform head cleaning.
Cause
User Check
- Perform head cleaning.
Cause
2-72
Solution
Adjust inclination of the head. Refer to
Section
1.4.
Perform head calibration with Function code 02.
Refer to
Chapter 5, Section
Update the paper feeding correction value with
Function code 58. Refer to
1.4.17.
Replace the PF encoder disc and clean the flushing
guide. Refer to
Chapter 3, Section
Replace the head/carriage unit.
Replace the main PCB ASSY.
Solution
Update the paper feeding correction value with
Function code 58. Refer to
1.4.17.
Replace the PF encoder disc and clean the flushing
guide. Refer to
Chapter 3, Section
Replace the engine unit.
Replace the main PCB ASSY.
Chapter 4,
1.4.2.
Chapter 5, Section
1.
Chapter 5, Section
1.
Confidential
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
