Brother DCPJ525W Service Manual page 291
Hide thumbs
Also See for DCPJ525W:
- Basic user's manual (100 pages) ,
- Quick setup manual (32 pages) ,
- User manual (85 pages)
Table of Contents
Advertisement
Error code
The following error has occurred.
01
Failed to detect the external
frame.
02
Internal image inclined.
03
Failed to detect position.
04
Failed to write head calibration
data.
05
The uneven printing correction
function for upper and lower ends
of the nozzle is disabled with
Function code 88.
06
Cannot get memory space.
07
The document scanner unit is
open.
09
Other scanning errors
10
A media is inserted and also the
USB cable or LAN cable is
connected.
• Clean the scanner glass.
• Reposition a document along the
document guides on the document
cover.
• Go back to step (1) and print out
"Print pattern for creating head
calibration data" again.
• Clean the scanner glass.
• Reposition a document along the
document guides on the document
cover.
• Restart the machine and perform the
function again.
• Replace the main PCB.
• Set selector 1 on AMS05 to "0" with
Function code 88, referring to
Section 1.4.33
• Delete stored data including fax
data.
• Stop any other function if being
used.
• Replace the main PCB.
• Close the document scanner unit.
• Reconnect the panel harness.
• Reposition the document scanner
open actuator.
• Replace the rubber keypad(s).
• Replace the panel PCB.
• Replace the document scanner unit.
• Replace the main PCB.
• Use Function code 55, referring to
Section 1.4.16
• Disconnect the USB cable.
5-7
Do the following:
in this chapter.
in this chapter.
Confidential
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
