English Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. General description Click-on trimmer attachment (S5230/04, S5210/04, S5082/61, S5081/04, S5079/04, S5078/04 only) Protection cap for shaving unit...
English Important safety information Read this important information carefully before you use the appliance and its accessories and save it for future reference. The accessories supplied may vary for different products. Danger Keep the supply unit dry. Warning To charge the battery, only use the detachable supply unit (HQ8505) provided with the appliance.
Page 8
If your shaver comes with a cleaning system, always use the original Philips cleaning fluid (cartridge or bottle, depending on the type of cleaning system). Always place the cleaning system on a stable, level and horizontal surface to prevent leakage.
Page 9
English Electromagnetic fields (EMF) This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields. General This shaver is waterproof. It is suitable for use in the bath or shower and for cleaning under the tap. For safety reasons, the shaver can therefore only be used without cord.
English Battery fully charged Note: When the battery is full, the display switches off automatically after 30 minutes. Note: This appliance can only be used without cord. Battery charge indicator with 1 light When the battery is fully charged, the battery charge indicator lights up white continuously.
English Cleaning reminder Clean the shaver after every shave for optimal performance. When you switch off the appliance, the cleaning reminder flashes to remind you to clean the appliance. Travel lock You can lock the appliance when you are going to travel.
Page 12
Charge the shaver before you use it for the first time and when the display indicates that the battery is almost empty. Charging takes approx. 1 hour (XZ5800, S5230/04, S5210/04, S5095/58, S5090/58, S5081/04) or 8 hours (S5091/50, S5082/61, S5080/03, S5079/04, S5078/04, S5077/04).
English Using the appliance Note: This appliance can only be used without cord. Switching the appliance on and off To switch on the appliance, press the on/off button once. 2 To switch off the appliance, press the on/off button once. Shaving Skin adaptation period Your first shaves may not bring you the result you...
Page 14
English To shave with shaving foam or shaving gel, follow the steps below: Apply some water to your skin. 2 Apply shaving foam or shaving gel to your skin. 3 Rinse the shaving unit under the tap to ensure that the shaving unit glides smoothly over your skin.
Page 15
English Using the click-on attachments Note: The accessories supplied may vary for different products. The box shows the accessories that have been supplied with your appliance. Removing or attaching the click-on attachments Make sure the appliance is switched off. 2 Pull the attachment straight off the appliance. Note: Do not twist the attachment while you pull it off the appliance.
Page 16
Use the rotating cleansing brush attachment with your daily cleansing cream. The cleansing brush attachment removes oil and dirt, contributing to a healthy and oil-free skin. (XZ5800/69, S5095/58, S5091/50, S5090/58 only) Attach the attachment to the appliance ('click'). 2 Moisten the attachment with water.
Page 17
English 7 After approx. 20 seconds move the appliance to your other cheek and start cleansing this part of your face. 20 sec. 8 After approx. 20 seconds move the appliance to your forehead and start cleansing this part of your face.
English 4 Slowly move the attachment around to remove all unwanted hairs in your nostrils. 5 Clean the attachment after use (see 'Cleaning and maintenance'). Trimming ear hair When trimming ear hair, make sure your outer ear channels are clean and free from wax. Attach the attachment to the appliance ('click').
Page 19
English Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. Switch on the appliance. 2 Rinse the shaving unit under a warm tap. 3 Switch off the appliance. Press the release button to open the shaving unit. 4 Rinse the hair chamber under the tap.
Page 20
Cleaning the cleansing brush attachment Clean the cleansing brush attachment every time you have used it. (XZ5800/69, S5095/58, S5091/50, S5090/58 only) Switch off the appliance. 2 Detach the brush head from the brush base. 3 Clean the parts thoroughly with warm water and soap.
Page 21
English Cleaning the nose trimmer attachment Clean the nose trimmer attachment every time you have used it. (S5091/50, S5082/61 only) Make sure the appliance is switched off. 2 Rinse the cutting element of the nose trimming head with hot water. 3 Switch on the appliance and rinse the cutting element once more to remove any remaining hairs.
Page 22
2yrs you to replace the shaving heads every two years. Replace damaged shaving heads immediately. Always replace the shaving heads with original Philips shaving heads (see 'Ordering accessories'). Replacement reminder (S5230/04, S5210/04 only) The replacement reminder indicates that the shaving heads need to be replaced.The shaving unit symbol and arrows light up when you switch off the appliance.
Page 23
English 4 Turn the retaining rings anticlockwise and remove them. Place them aside in a safe place. 5 Remove the shaving heads from the shaving head holder. Throw away the used shaving heads immediately to avoid mixing them with the new shaving heads.
Page 24
English Turn the ring clockwise until your hear a click to indicate that the ring is fixed. Note: Hold the shaving head holder in your hand when you reinsert the shaving heads and reattach the retaining rings. Do not place the shaving head holder on a surface when you do this, as this may cause damage.
We strongly advise you to take your product to an official collection point or a Philips service centre to have a professional remove the rechargeable battery. Follow your country’s rules for the separate collection of electrical and electronic products and rechargeable batteries.
Page 26
English Removing the rechargeable appliance battery Only remove the rechargeable battery when you discard the appliance. Before you remove the battery, make sure that the appliance is disconnected from the mains and that the battery is completely empty. Take any necessary safety precautions when you handle tools to open the appliance.
4 Take out the battery holder and cut the battery tags with a pair of cutting pliers. Warranty and support If you need information or support, please visit www.philips.com/support or read the international warranty leaflet. Warranty restrictions The shaving heads (cutters and guards) are not covered by the terms of the international warranty because they are subject to wear.
Page 28
English Shaver Problem Possible cause Solution The appliance The appliance is Unplug the appliance and does not work still attached to the press the on/off button to when I press the wall socket. For switch on the appliance. on/off button. safety reasons, the appliance can only be used without...
Page 29
English Problem Possible cause Solution To clean the shaving heads thoroughly, remove the shaving heads from the shaving head holder one by one (see 'Replacement'). Then separate the cutter from its guard and rinse each matching set under the tap. After rinsing, place the cutter back into its corresponding guard.
Page 30
English Problem Possible cause Solution The nose The cutting element Clean the cutting element trimmer of the attachment by rinsing it under the tap attachment does is very dirty, for with hot water. Switch on not work. instance because the appliance and rinse the some nasal mucus cutting element once more has dried inside the...