Contents 1 Important 7 Troubleshooting Safety Mains fuse Care for your product Care of the environment Compliance Help and support 2 Your product Main unit Remote control Connectors Wireless speakers Wireless subwoofer 3 Connect and set up Connect the main unit Charge speakers Pair up with speakers/subwoofer Place speakers...
1 Important back or bottom of the product. Never connect the product to the power outlet if the voltage is different. Risk of injury or damage to this product! Read and understand all instructions before you • Never place the product or any objects use your product.
• When you change the batteries, always Care of the environment keep all new and used batteries out of reach of children. Ensure that the battery Disposal of your old product and battery compartment is completely secure after you replace the battery. •...
Directive 1999/5/EC. Congratulations on your purchase, and A copy of the EC declaration of Conformity is welcome to Philips! To fully benefit from the available at www.philips.com/support. support that Philips offers, register your product at www.philips.com/welcome.
• Blinks continuously when no audio Remote control from the selected HDMI ARC source is detected, or when an unsupported This section includes an overview of the audio format is detected. remote control. Blue LED • Lights up when you switch to Bluetooth mode and Bluetooth devices are paired.
: Switch to Bluetooth mode; Press and Connectors hold three seconds to break the current Bluetooth connection. This section includes an overview of the HDMI ARC: Switch your source to HDMI connectors available on this product. ARC connection. Skip to the previous or next track in USB mode and Bluetooth mode (only for AVRCP-supported Bluetooth devices).
Wireless speakers • Switch the surround speaker on. • The surround speaker automatically This product comes with a pair of wireless turns off after 4 minutes of being surround speakers. wirelessly disconnected from the main unit. Wireless subwoofer This product comes with a wireless subwoofer. * The illustration above is for either of wireless surround speakers.
3 Connect and set This section helps you connect this product to a TV and other devices, and then set it up. For information about the basic connections of this product and accessories, see the quick start guide. Note Dock the left and right wireless speakers •...
Pair up with the speakers Note • After the subwoofer is manually connected to the main Turn on the main unit and the surround unit, pair the surround speakers with the main unit wireless speakers. again for re-connection. » If the connection to the main unit is lost, the red and orange LEDs on the wireless speaker blink alternatively.
L/ R surround speakers (left/right): Place the rear surround speakers to the left and right side of your seating position, either in line with it or slightly behind it. SUBWOOFER (subwoofer): Place the subwoofer at least one meter to the left or right of the TV. Leave about 10-centimeter clearance from the wall.
Page 13
Option 1: Connect audio through a Option 3: Connect audio through digital optical cable analog audio cables Best quality audio Basic quality audio AUDIO OUT Using an optical cable, connect the OPTICAL connector on the right base Using an analog cable, connect the AUDIO speaker of this product to the OPTICAL IN (3.5mm jack) on the right base speaker OUT connector on the TV or other...
4 Use your Equalizer product Change the high frequency (treble) and low frequency (bass) settings of this product. Press TREBLE +/- or BASS +/- to change the frequency. This section helps you use this product to play » If the treble or bass is set to the audio from connected devices.
• For pairing, tap the NFC device on the Bluetooth, search for and select Philips NFC tag of this product. CSS5235Y to start connection (see the • The operational range between the user manual of the Bluetooth device on main unit (left and right speakers) and a how to enable Bluetooth).
Press the buttons on the MP3 player to Note select and play audio files or music. • This product supports WMA files which are converted Press once or two times AUX on the via Windows Media Player (WMA files converted via remote control until higher volume is other file format converters may not work).
Update software via USB you might damage this player. Check the latest software version on www.philips.com/support. • Search for your model and click on "Software and drivers". Download the software into a USB storage device.
• Power supply: • The power consumption in standby or • Model (Philips branded AC power networked standby is less than 0.5W. adapter): DYS602-210309W; • To deactivate Bluetooth connection, press AS650-210-AA309 and hold the Bluetooth button on the •...
Page 19
If you still have a problem, get support at product. www.philips.com/support. • You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the Main unit function.
Page 20
A device cannot connect with this product via NFC. • Make sure that the device is supported by NFC. • Make sure that NFC is enabled on the device (see the device' s user manual for details). • For pairing, tap the NFC device on the NFC tag of this product.
Page 22
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.