Table of Contents
Advertisement
Removing
the crispers
and crisper
cover
To remove the
crispers:
1. Slide crisper straight out to the stop.
2. Lift the front and slide out the rest of the way.
3. Replace in reverse order.
Pull out to the stop, lift
the front, and pull again.
To remove the cover:
1. Push up the glass insert from the bottom, then slide
out with both hands.
2. Lift front of cover frame.
3. Lift cover frame up and out.
To replace the cover:
1. Fit back of cover frame into notch supports on back
wall of refrigerator, then lower the front into place.
Remove the glass insert.
2. Make sure the front cover metal support is in the
Lift the cover front, then
,
notches in the sides of the liner.
the back.
NOTE: If the support is not positioned properly, the
NOTE: Glass insert is
doors may not close all the way.
heavy. Handle it carefully.
-
3. Slide back of glass insert into place, then lower front.
Adjusting
the crisper
humidity
control
You can control the amount of humidity in the moisture-
sealed crispers. Adjust the control to any setting be-
Humidity
Control
tween LOW and HIGH.
l
LOW (open) lets moist air out of the crisper for best
storage of fruits and vegetables with skins.
l
HIGH (closed) keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
HIGH.
. . . . LOW
Adjusting
the half-width
freezer
shelf
Adjust the shelf according to the space you need in
your freezer. Use the bottom position when you don't
need the shelf at all.
To adjust the shelf:
1. Remove items from the shelf.
2. Lift shelf up at front.
3. Pull shelf out to the stop.
4. Lift back of shelf.
5. Pull shelf out the rest of the way.
To replace the shelf:
1. Guide rear of shelf into desired guide.
2. Lift rear of shelf over stop.
3. Slide shelf in all the
way.
4. Lower front into place.
11
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
