Table of Contents
Advertisement
SC-B6000 Series
User's Guide
D
Raise the roll lock lever.
E
Holding the paper by the roll paper adapters,
move the roll to the roll rest.
F
Lift the adapter lock levers to release the roll
paper adapters.
G
Remove the roll paper adapters.
After rewinding the roll paper carefully, store it
in the original package.
Basic Operations
Viewing and Changing
Media Settings
The following is displayed in the control panel after
paper is loaded.
Checking Media Settings
The dialog displays the following options for the paper
currently loaded in the printer.
Select Paper Type
The following display indicates what is used as the basis
for paper settings.
RIP settings: Printing is performed based on the
RIP settings.
XXXXXXXXXXXXXXXXXX: Printing is
performed based on paper settings #1 saved in the
printer.
This printer allows you to configure and save various
paper settings depending on the characteristics of the
paper used. You can save up to 10 different settings in
setting slots 1 through 10.
"Saving Settings" on page 34
U
Remaining Setup
When this option is turned On, the approximate
amount of paper remaining is calculated based on the
set paper length and the amount used in printing, and
this value is displayed in the information display area of
the . tab. This allows you to check the amount of paper
remaining on-screen before printing, which helps you
to determine when you need to replace the paper. You
can also set a threshold value which, when the amount of
paper remaining decreases below this level, will display
a warning message.
25
Advertisement
Table of Contents
