Table of Contents
Advertisement
4 ASCII protocol communication
5. Create receive data block DB10.
Fig. 14: Receive data block DB10
6. Invoke receive function block
The parameters of the receive function block FB2 P_RCV of CP340 are set as in
the table below:
LADDR
DB_NO
DBB_NO
LEN
EN_R
R
NDR
ERROR
STATUS
Table 4: Parameter definition of FB2 P_RCV
Fig. 15: Invoke FB2 P_SEND from OB1
CP340/CP341/CP440/CP441 Communication and Programming
Entry-ID: 88867653,
V1.0,
Start logic address in hardware configuration, which is 256 in this example
Send Data block number, which is 10(DB10) in this example
Start address of Send Data, which is 0(DB10.DBB0) in this example
Length of receive data, which is MW2 in this example. This value is not 0 only
in the current cycle when data are received. The length of received data may
be determined by checking the MW4 value.
Enable receive bit, which is M0.1 in this example.
Cancel communication, which is not available in this example
Receive complete bit, which is TRUE if Receive completes and has no error
error bit, TRUE indicating that it has an error
status word, ID error code. See CP340 manual for related descriptions
02/2014
13
Hide quick links:
Advertisement
Table of Contents
