Table of Contents
Advertisement
Section 3 - Configuration
In the Settings menu on the bar on the top of the page, click Wireless to see the wireless configuration options. To configure the router's guest
zone, click the Guest Zone link. Refer to page 48 for details. Click Advanced Settings... to expand the list and see all of the options. The following
options apply to both the 2.4 GHz and the 5 GHz wireless frequency bands:
Status:
Enable or disable the wireless frequency band.
Wi-Fi Name
Create a name for your wireless network using up to 32 characters.
(SSID):
Password:
Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Security Mode:
Choose None, WEP, or WPA/WPA2-(Personal) (recommended).
802.11 Mode:
Select the desired wireless networking standards to use. The available
options will depend on the wireless frequency band, as well as the
currently selected security mode.
Wi-Fi Channel:
Select the desired channel. The default is Auto (recommended).
Transmission
Select the desired wireless transmission power.
Power:
Channel Width:
Select Auto 20/40 if you are using both 802.11n and non-802.11n
wireless devices, or select 20 MHz if you are not using any 802.11n
wireless clients.
Visibility Status:
The default setting is Visible. Select Invisible if you do not want to
broadcast the SSID of your wireless network.
D-Link DIR-830L User Manual
Wireless
46
- Quick Links:
- User Manual
- Features
- Setup Wizard
- Wireless
Hide quick links:
Advertisement
Table of Contents
