hit counter script
Motorola AP 7161 Installation Manual
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Wireless Access Point
  5. AP 7161
  6. Installation manual
Motorola AP 7161 Installation Manual

Motorola AP 7161 Installation Manual

Hide thumbs Also See for AP 7161:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Installation Manual
AP 7161
ACCESS POINT
INSTALLATION GUIDE

Advertisement

Table of Contents
loading

Related Manuals for Motorola AP 7161

Summary of Contents for Motorola AP 7161

  • Page 1 AP 7161 ACCESS POINT INSTALLATION GUIDE...
  • Page 2 AP 7161 Access Point Installation Guide...
  • Page 3 Motorola Solutions reserves the right to make changes to any product to improve reliability, function, or design. Motorola Solutions does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.

  • Page 4: Table Of Contents

    AP 7161 Hardware..................................7 AP 7161 Antenna Assessories..............................7 AP 7161 2.4 GHz Antennas ............................... 8 AP 7161 4.9 GHz and 5 GHz Antennas ..........................8 AP 7161 Multi Band Antennas ............................9 Outdoor PoE Hardware and Mounting Accessories....................... 10 AP 7161 Mounting Accessories.............................

  • Page 5: Introduction

    AP 7161 Access Point Installation Guide Introduction Perfect for extending network coverage to outside areas, the AP 7161 brings the latest 802.11n 3x3 Multiple Input Multiple Output (MIMO) tri-radio design together with rugged outdoor performance. True perimeter security is provided using either a dedicated dual band sensor or software mode for both 2.4GHz and 5GHz bands to deliver 24x7 rogue detection and termination.

  • Page 6: Document Conventions

    AP 7161 offers band unlocked radio flexibility. The user can choose between 2.4Ghz, 5Ghz and 4.9Ghz bands for the radio type. The AP 7161 supports 3x3 MIMO technology, reaching a maximum data rate of 300 Mbps to maintain high performance and better quality of transmission.

  • Page 7: Ap 7161 Hardware

    AP-7161-66S40-EU AP 7161 OUTDOOR DUAL RADIO 802.11N AP W/SENSOR EU The AP 7161 Vehicle Mounted Modem (VMM) is a software profile within the WiNG 5 architecture that uses the same hardware as the AP 7161 access point infrastructure models. AP 7161 Antenna Accessories Antennas must be ordered separately.

  • Page 8: Ap 7161 2.4 Ghz Antennas

    Connector: N-male ML-2499-HPA4-01 Outdoor rated Type: dipole Gain: 4dBi@2.4GHz Connector: N-male RAN4054A Outdoor rated Type: dipole downtilt Gain: 8dBi@2.4GHz Connector: N-male AP 7161 4.9 GHz and 5 GHz Antennas Height Part Number Band Gain Description (inches) ML-5299-HPA10-01 4.9-5.8 19.5 Outdoor rated Type: dipole Gain: 10dBi@4.9GHz...

  • Page 9: Ap 7161 Multi Band Antennas

    Gain: 3.6dBi (typical) to 4.5dBi (maximum) @2.4GHz, 4.5 (typical) to 5.4 (maximum) @5.8GHz Connector: RP-SMA male The ML-2452-HPAG5A8-01 multi band antenna is suggested for use with AP 7161 NOTE sensor models AP-7161-66S40-US and AP-7161-66S40-WR on ports R3-A and R3-B, respectively. The is suggested for use with AP 7161 VMM.

  • Page 10: Outdoor Poe Hardware And Mounting Accessories

    Outdoor PoE Hardware and Mounting Accessories The AP 7161 is a Power over Ethernet (PoE) device. When deployed, the use of an outdoor rated PoE power supply and mounting bracket may be required. The recommended Motorola Solutions PoE accessories are listed in the AP 7161 Power Options Using Power over Ethernet on page 34 following table.

  • Page 11: Package Contents

    • AP 7161 access point • Weatherproof RJ45 plug kit • AP 7161 Access Point Installation Guide (this document) The following items are not included with the AP 7161 access point models but can be ordered from Motorola Solutions: • Antennas •...

  • Page 12: Hardware Installation Guidelines

    • The installation professional should be familiar with all grounding requirements and regional codes and ensure that the access point and mounting asset are properly grounded. The grounding cable for an AP 7161 must be at a minimum a #10 gauge wire cross section. The cable can be attached to the unit using one of the following methods: Loosen the grounding screw, insert the grounding cable into the hole below it, and tighten the screw.

  • Page 13: Warnings

    AP 7161 Access Point Installation Guide Warnings • Read all installation instructions and site survey reports, and verify correct equipment installation before connecting the access point to its power source. • Remove jewelry and watches before installing this equipment. • Verify that the unit is grounded before connecting it to the power source.

  • Page 14: Access Point Placement

    • Devices can be deployed using any of the recommended outdoor deployment procedures. Detailed recommendations can befound in the AP 7161 Access Point System Planner. • Line of Sight (LoS) guidelines should be given special consideration when deploying devices.

  • Page 15: Ap 7161 Hardware Overview

    An AP 7161 must be installed by trained professionals familiar with RF planning and regulatory limits defined by the regulatory bodies of the country where the devices are being deployed. All common precautions for grounding and Electrostatic Discharge (ESD) protection should be observed during deployment and installation.
  • Page 16 2. Care must be taken to provide the correct antenna for the operating band of each port. AP 7161 three radio models (AP-7161-66S40-US and AP-7161-66S40-WR) are configured with eight N type connectors to support two active WLAN data radios and a dedicated sensor radio as the third.

  • Page 17: Ap 7161 Console, Ge1/Poe And Ge2 Ports

    AP 7161 Access Point Installation Guide AP 7161 Console, GE1/POE and GE2 Ports The AP 7161 has Ethernet ports for external console, GE1/POE, and GE2 connections.To gain access to the ports you will need to remove the protective caps. The Ethernet cable from the PoE device (if used) connects to the GE1/POE port on the unit.

  • Page 18: Ap 7161 Grounding Screw

    When making connections using these ports, a properly rated RJ45 connector is required. One weatherproof RJ45 plug kit is provided with each access point. When connecting cables to the AP 7161 Ethernet ports, follow the instructions in the connector packaging and tighten the connectors to create a weatherproof seal. Shielded cables are required.

  • Page 19: Led Indicators

    The AP 7161 access point has six LEDs on the top of the access point housing. When the access point is positioned with the Motorola Solutions logo in the lower right corner, LED 1 is on the left and LED 6 is on the right.

  • Page 20: Two Radio Leds

    White at 1 second interval indicates “no adoption”. Solid White indicates normal operation. If LED 6 remains blinking Red for longer than 10 minutes, cycle the power to the WARNING! unit. If the condition persists, contact the Motorola Solutions support center.

  • Page 21: Three Radio Leds

    AP 7161 Access Point Installation Guide Three Radio LEDs A three radio model access point with sensor (P/N AP-7161-66S40-US and AP-7161-66S40-WR) has the following unique LED behavior: LED 1 LED 2 LED 3 LED 4 LED 5 LED 6 (Sensor) (2.4 GHz)

  • Page 22: Ap 7161 Hardware Mounting And Installation

    AP 7161 Hardware Mounting and Installation It is recommended to use the AP 7161 mounting bracket kit (KT-147407-01) for most deployments. When a standoff distance is required for a pole mounted or wall mounted installation, use the extension arm kit (KT-150173-01).

  • Page 23: Extension Arm Kit

    Extension Arm Kit When mounting an AP 7161 on poles more than 3 inches in diameter, use the extension arm kit (KT-150173-01) to provide a minimum standoff distance of twelve inches to avoid interference with the antennas.
  • Page 24 AP 7161 Access Point Installation Guide The extension arm kit can also be used in combination with the any of the brackets from the mounting bracket kit: The following ancillary hardware to attach the extension arm to the mounting bracket kit sections is included in...

  • Page 25: Pole Mounted Installations

    Pole Mounted Installations The mounting hardware kit and extension arm can be used in various combinations to properly install the AP 7161 on a pole. For poles of up to 3 inches in diameter, attach the pole mount bracket of the mounting hardware kit at the desired position on the pole using band clamps up to 3/4 inch width, or a 1/2 inch x 4 inch wide U-bolt and nuts.

  • Page 26: Vertical Pole Mount

    AP 7161 Access Point Installation Guide Vertical Pole Mount Use the following procedures for vertical pole mount installations. Use of the extension arm is recommended when mounting the access point to poles greater than 3 inches is diameter. For poles up to 3 inches in diameter when using a U-bolt: Thread the two inner nuts onto the U-bolt.
  • Page 27 AP with the gore vent. Using a torque wrench or a ratchet and a 10mm socket, or an adjustable wrench, attach (but don’t tighten) the access point bracket section to the AP 7161 with the with four M6 hex flange screws.
  • Page 28 AP 7161 Access Point Installation Guide Insert two M6 hex flange screws into the bottom holes on the sides of the access point bracket section. With the access point positioned so that the gore vent is facing down, insert the two M6 hex flange screws in the bottom holes on the sides of the access point bracket section into the open slot connections on the bottom of the angle adapter bracket section.

  • Page 29: Wall Mounted Installations

    Wall Mounted Installations For wall mounted installations, use only the access point bracket and angle adjust bracket sections. Always mount the AP 7161 with the black gore vent facing down. CAUTION The U-bolt and band clamps are not included in the mounting bracket kit.
  • Page 30 Using a torque wrench or a ratchet and a 10mm socket, or an adjustable wrench, attach (but don’t tighten) the access point bracket section to the AP 7161 with four M6 hex flange screws and insert two M6 hex flange screws into the bottom holes on the sides of the access point bracket section.
  • Page 31 AP 7161 Access Point Installation Guide To use only the extension arm: Using four #10/32 lag bolts, attach the extension arm at the desired mounting location. Using a torque wrench or a ratchet and a 10mm socket, or an adjustable wrench, attach the mounting extension arm to the access point with four M6 hex flange screws.

  • Page 32: Ap 7161 Vmm Mounting And Installation

    AP 7161 Hardware on page 7 An AP 7161 access point operating as a VMM can be permanently mounted in a vehicle. It provides mesh backhaul access to a mesh infrastructure network to connect mobile data terminals, laptop computers, or any other device that has either an Ethernet or 802.11 wireless capability.
  • Page 33 Attach the vehicle mount securely to the mount point with metal screws or bolts (not provided). Securely attach the AP 7161 top bracket sub-assembly to the vehicle mount with the four pre-installed thumb screws. Tighten the screws to 90 inch pounds (lbf-in) using a philips screwdriver or pliers.

  • Page 34: Ap 7161 Power Options Using Power Over Ethernet

    NOTE injector. Refer to the AP-PSBIAS-7161 Install Guide. If located within 100 meters of the controller and a PoE port is available, the AP 7161 access point can also be connected directly to one of the following Motorola Solutions controllers: •...

  • Page 35: Ap 7161 Vmm Power Options

    An AP 7161 operating as a VMM has the capability of being installed into a variety of vehicular and mobile environments. As such, a professional certified installation partner should be consulted on appropriate power sources and installation into a vehicle or mobile asset.

  • Page 36: Basic Ap 7161 Configuration

    Motorola Solutions releases updates with new controller functionality. For information on how use a Motorola Solutions RFS Series controller to manage an AP 7161 access point, refer to the Motorola Solutions WiNG 5 Access Point System Reference Guide at http://supportcentral.motorola.com.

  • Page 37: Specifications

    AP 7161 Access Point Installation Guide Specifications Hardware Specifications Operating Voltage 36-57 VDC Operating Current Not to exceed 750 mA@48 VDC Power In (PoE) PoE support inbound power - 802.3AT on GE1/POE port Ethernet Ports 2 Gigabit Ethernet ports Dimensions (unit) mounted 28.1cm W x 21.8cx H x 9.4cm D (11.1"...

  • Page 38: Environmental Specifications

    AP 7161 Access Point Installation Guide Environmental Specifications Operating Temperature -40 to +70 degrees celsius Storage Temperature -40 to +85 degrees celsius Operating Humidity 5-95 percent Operating Altitude 8,000 feet Storage Altitude 30,000 feet Electrostatic Discharge EN61000-4-2. Air +/-15kV, Contact +/-8kV...
  • Page 39 CB-IEC 60950-1:2005 + A1: 2009, -22:2005; EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 Certifications RoHS/WEEE/CMM; CE * For more country specific regulatory information, please contact Motorola Solutions or your authorized partner. Warranty • One (1) year on AP 7161 hardware (accessories not included) •...

  • Page 40: Basic Troubleshooting

    AP 7161 Access Point Installation Guide Basic Troubleshooting Basic troubleshooting recommendations for the AP 7161 access point are listed in the following table: Indication Response LEDs are not lit No power to device: • Verify 802.3at compatible source is connected via PoE •...

  • Page 41: Regulatory Compliance

    Motorola Solutions, Inc. (collectively “Motorola”). All Motorola Solutions devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Any changes or modifications to Motorola Solutions equipment, not expressly approved by Motorola Solutions, could void the user's authority to operate the equipment.
  • Page 42 AP 7161 Access Point Installation Guide 1 The devices subject to the requirements in this KDB can select the initial channel for operation to avoid TDWRs and apply the Uniform Channel Spreading requirements (see FCC 06-96 in ET Docket 03-122 released June 30, 2006) on the remaining available frequency band of operation.
  • Page 43 AP 7161 Access Point Installation Guide We encourage the manufacturers to include information for the users, including the operators and installers, to ensure that they understand that it is incumbent on them to cooperate with manufacturers to implement any changes necessary to facilitate compliance.
  • Page 44 AP 7161 Access Point Installation Guide MCCOOK W 087 51 31 N 41 47 50 5615 MHz STATE CITY LONGITUDE LATITUDE FREQUENCY TERRAIN ANTENNA ELEVATION HEIGHT ABOVE (MSL) [ft] TERRAIN [ft] CRESTWOOD W 087 43 47 N 41 39 05...

  • Page 45: Wireless Country Approvals

    AP 7161 Access Point Installation Guide CLEVELAND W 082 00 28 N 41 17 23 5645 MHz STATE CITY LONGITUDE LATITUDE FREQUENCY TERRAIN ANTENNA ELEVATION HEIGHT ABOVE (MSL) [ft] TERRAIN [ft] COLUMBUS W 082 42 55 N 40 00 20...

  • Page 46: Power Supply

    The Federal Communications Commission (FCC) with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. Motorola Solutions products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio according to the instructions found in this manual will result in user exposure that is substantially below the FCC recommended limits.
  • Page 47 AP 7161 Access Point Installation Guide Wireless Devices - Countries Country Selection Select only the country in which you are using the device. Any other selection will make the operation of this device illegal. Operation in the US The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware.
  • Page 48 • Italy requires a user license for outside usage Statement of Compliance Motorola Solutions hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www.motorola.com/doc.
  • Page 49 Regulatory Declarations for AP 7161 - BRAZIL Note: The certification mark applied to the AP 7161 is for Restrict Radiation Equipment. This equipment operates on a secondary basis and does not have the right for protection against harmful interference from other users including same equipment types.
  • Page 50 AP 7161 Access Point Installation Guide Wireless device operates in the frequency band of 5.25-5.35 GHz, limited for indoor use only. 在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用...
  • Page 51 AP 7161 Access Point Installation Guide Waste Electrical and Electronic WEEE...
  • Page 52 AP 7161 Access Point Installation Guide...

  • Page 53: Motorola Solutions Support Center

    AP 7161 Access Point Installation Guide Motorola Solutions Support Center If you have a problem with your equipment, contact Motorola Solutions Support for your region. Support and issue resolution is provided for products under warranty or that are covered by an Motorola Solutions Support agreement.

  • Page 54: Motorola Solutions End-User Software License Agreement

    (ii) means any modifications, enhancements, new versions and new releases of the software provided by Motorola Solutions; and (iii) may contain items of software owned by a third party supplier. The term "Software" does not include any third party software provided under separate license or third party software not licensable under the terms of this Agreement.
  • Page 55 Software or Documentation to be placed in the public domain; (iv) remove, or in any way alter or obscure, any copyright notice or other notice of Motorola Solutions' proprietary rights; (v) provide, copy, transmit, disclose, divulge or make the Software or Documentation available to, or permit the use of the Software by any third party or on any machine except as expressly authorized by this Agreement;...
  • Page 56 Agreement. 5.OWNERSHIP AND TITLE 5.1 Motorola Solutions, its licensors, and its suppliers retain all of their proprietary rights in any form in and to the Software and Documentation, including, but not limited to, all rights in patents, patent applications, inventions, copyrights, trademarks, trade secrets, trade names, and other proprietary rights in or relating to the Software and Documentation.
  • Page 57 End-User License Agreement. End-User Customer's right to use the Software will continue for the life of the Products with which or for which the Software and Documentation have been provided by Motorola Solutions, unless End-User Customer breaches this End-User License Agreement, in which case this End-User License Agreement and End-User Customer's right to use the Software and Documentation may be terminated immediately by Motorola Solutions.
  • Page 58 11.4 Waiver. No waiver of a right or remedy of a Party will constitute a waiver of another right or remedy of that Party. 11.5 Assignments. Motorola Solutions may assign any of its rights or sub-contract any of its obligations under this End-User License Agreement or encumber or sell any of its rights in any Software, without prior notice to or consent of End-User Customer.
  • Page 59 AP 7161 Access Point Installation Guide 11.9 Dispute Resolution. Unless End-User Customer is a sovereign governmental entity, any dispute arising from or in connection with this End-User License Agreement shall be submitted to the sole and exclusive forum of the state and federal courts sitting in New Castle County, Delaware (the "Delaware Courts"), and each Party...

  • Page 60: Ap 7161 Series Rohs Compliance

    塑料和聚合物部件 (Plastic and Polymeric Parts) 光学和光学组件 (Optics and Optical Components) 电池 (Batteries) O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X： 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。 对销售之日的所售产品，本表表示，公司供应链的电子信息产品可能包含这些物质。注意：在所售产品中可能会 也可能不会含有所有所列的部件。 This table was created to comply with China RoHS requirements for the Motorola Solutions AP 7161 model access point.
  • Page 61 AP 7161 Access Point Installation Guide...
  • Page 62 AP 7161 Access Point Installation Guide...
  • Page 63 AP 7161 Access Point Installation Guide...
  • Page 64 Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2012 Motorola Solutions, Inc. All Rights Reserved.

Table of Contents