Advertisement
Quick Links
Download this manual
See also:
Reference Manual
Owner's Manual
Thank you for your purchase of the Yamaha PX10, PX8, PX5 or PX3 power amplifier. Please read through
this manual carefully before using for the first time, in order to take full advantage of your PX power ampli-
fier's superlative features and enjoy trouble-free operation for years to come.
After you have read the manual, keep it in a safe, convenient place for reference when needed.
• Please read the PRECAUTIONS on the reverse side of this manual before use.
• The illustrations as shown in this manual are for instructional purposes only.
• The company names and product names used in this manual are the trademarks or registered trademarks
of their respective companies.
• In this manual, the PX10, PX8, PX5 and PX3 power amplifier models are referred to collectively as "PX
amplifier."
• Unless specified otherwise, the example illustrations used in this manual are taken from the PX10.
• The PX amplifier provides two setting methods: Basic mode and Advanced mode. This manual explains
operations in the Basic mode. Operate in the Advanced mode for detailed settings. For information on the
Advanced mode, refer to the PX10/PX8/ PX5/PX3 Reference Manual.
The PX10/PX8/ PX5/PX3 Reference Manual is an electronic file in PDF format. You can read this book
on a computer. Use Adobe
®
Reader
®
to read this book on screen, search for words very quickly, print
specific pages, or click links to display sections of special interest. The ability to search for words, or to
follow links directly to relevant sections in the document, are helpful attributes of this electronic file for-
mat. We encourage you to take advantage of these benefits. You can download the latest Adobe Reader
application from the website listed below.
http://www.adobe.com/
Features
• Maximum output of 1,000W out of lightweight chassis (PX10)
• Yamaha's proprietary Class-D and processing technologies provide superb sound quality and high reliability
• Speaker presets that allow you to get the best possible performance from Yamaha speakers
• A wide variety of DSP functions, including D-CONTOUR processing
• CONFIG WIZARD that provides the optimal configuration for any speaker
• Broad range of input/output connectors
Included accessories
• AC power cord
CAUTION
• Owner's Manual (this leaflet)
Please keep the USB cap out of reach of children,
• Technical Specifications (English)
to keep them from accidentally swallowing it.
• AC plug clamp
• USB cap
Setup
The PX amplifier can be used as a normal amplifier by simply setting the volume knobs properly. The fol-
lowing settings enhance the performance of speakers.
Pre-installation
Mount PX amplifiers in a rack as required.
Make sure that the power is turned off, and
turn both the two volume knobs all the way
to the left.
In this manual, methods of operations are explained with the following marks.
[(item name)]: Rotate the main knob to select [(item name)].
: Press the Main knob.
: Press the [MENU] key.
: Press the [
] (back) key.
: Operate A, and then operate B.
A solid arrow (
) between steps indicates a basic operation procedure, and a dotted arrow (
cates an operation returning to the previous screen.
1
ZQ41390
Stereo connection
EN
(using two full-range speakers)
Mixer
R channel
L channel
Full-range speaker
for R channel
CAUTION
Please carry out "Pre-installation" surely. Do not connect any cables while the power is on.
1.
Connect the full-range speaker for L channel to the
[SPEAKERS] A terminal and the full-range speaker for
R channel to the [SPEAKERS] B terminal.
2.
Connect the output from sources (such as a mixer) to
the [INPUT] A/B connectors. Connect the L channel
source to the [INPUT] A connector, and the R channel
source to the [INPUT] B connector.
3.
Connect the AC power cord and turn on. First connect the
AC power cord to the connector on the unit, and then plug
it into an appropriate AC power outlet.
4.
Secure the AC power cord with the AC plug clamp to pre-
vent accidental disconnection from the connector. Refer to
the "Rear panel" section on the reverse side for instructions on installation.
HOME screen
MENU screen (top screen)
[CONFIG WIZARD]
SP TYPE screen
[FULL+FULL]
Speaker selection
Select a speaker to be connected from the shown list.
If the speaker is not in the list, select "GENERIC."
[(Speaker name)]
HPF screen
Select a cutoff frequency of the high pass filter. If
the high pass filter is not used, select "OFF."
[(Cutoff frequency)]
CONFIRMATION screen
[APPLY]
(Applies the set value)
Go on to the "Tone control" instructions.
) indi-
Cross-over connection
Mixer
Full-range speaker
for L channel
CAUTION
Please carry out "Pre-installation" surely. Do not connect any cables while the power is on.
1.
Connect the subwoofer to the [SPEAKERS] A terminal
NOTE
and the full-range speaker to the [SPEAKERS] B ter-
Refer to the "Wiring" section on the reverse
minal.
side for instructions on making connections.
2.
Connect the output from source (such as mixer) to the
[INPUT] A connector.
3.
Connect the AC power cord and turn on. First connect
the AC power cord to the connector on the unit, and then
AC IN connector
plug it into an appropriate AC power outlet.
4.
AC power cord
Secure the AC power cord with the AC plug clamp to pre-
To outlet
vent accidental disconnection from the connector. Refer to
"Rear panel" section on the reverse side for instructions on the installation.
HOME screen
MENU screen (top screen)
[CONFIG WIZARD]
SP TYPE screen
[FULL+SUB]
Speaker selection (A)
Select a subwoofer to be connected from the shown
list. If the subwoofer is not in the list, select
"GENERIC."
[(Speaker name)]
HPF screen
Select a cutoff frequency of the high pass filter of
the subwoofer. If the high pass filter is not used,
select "OFF."
[(Cutoff frequency)]
Speaker selection (B)
Select a full-range speaker to be connected from the
shown list. If the speaker is not in the list, select
"GENERIC."
[(Speaker name)]
X-OVER screen
Select a crossover frequency.
[(Crossover frequency)]
CONFIRMATION screen
[APPLY]
(Applies the set value)
(using a full-range speaker and a subwoofer)
Full-range
speaker
Input signal from the source, confirm that the sound is
being output from the speakers, and adjust the volume
appropriately.
MENU screen (top screen)
Subwoofer
NOTE
TUNING screen
Refer to "Wiring" section on the reverse side
for instructions on making connections.
AC IN connector
AC power cord
To outlet
D-CONTOUR screen
MODE Selection screen
Select one of the following three modes.
• OFF: Turns off D-CONTOUR.
• FOH/MAIN: Boosts the high and low frequency compo-
nents so that the frequency response is suitable for main
speaker use.
• MONITOR: Reduces the low frequency range, which could
otherwise tend to be boomy if the speaker is set directly on
the floor. This enables you to hear mid and high frequency
ranges clearly when using as a floor monitor.
D-CONTOUR screen
DEPTH Selection screen
Set over a range from 1 to 10.
The larger the value, the deeper the effect.
MENU screen (top screen)
HOME screen
NOTE
• To mute channel A, push the [A] key and the main knob simulta-
neously. To cancel muting, push the [A] key and the main knob
simultaneously again.
• To mute channel B, push the [B] key and the main knob simulta-
neously. To cancel muting, push the [B] key and the main knob
simultaneously again.
Go on to the "Tone control" instructions.
Tone Control
[TUNING]
[D-CONTOUR]
[MODE]
[(MODE)]
[DEPTH]
Advertisement
Related Manuals for Yamaha PX8
Summary of Contents for Yamaha PX8
- Page 1 [INPUT] A connector, and the R channel • In this manual, the PX10, PX8, PX5 and PX3 power amplifier models are referred to collectively as “PX Connect the AC power cord and turn on. First connect AC IN connector source to the [INPUT] B connector.
- Page 2 Fillial of Yamaha Music Europe Tel: +65-6740-9200 The Yamaha Pro Audio website provides a FAQ (a list of frequently asked questions, with answers). loudspeakers. Edif. Torre Banco General, Piso 7, GmbH, Tyskland the outlet.