They contain instructions about how to use the from improper connections and operations. The meanings of system in a safe and effective manner. Panasonic assumes the pictographs are explained below. It is important that you no responsibility for any problems resulting from failure to fully understand the meanings of the pictographs in order to observe the instructions given in this manual.
Page 3
Installation of this unit requires special skills and experi- ence. For maximum safety, have it installed by your dealer. Panasonic is not liable for any problems resulting from your own installation of the unit. ❑ Follow the instructions to install and wire the prod- uct.
Page 4
¡Park your car in a safe place and pull the side brake (parking brake) lever before watching the monitor. ¡A rear monitor (option) displays moving pic- tures while driving. Note: Be sure to connect the side brake (parking ¡ brake) connection lead. Installation Instructions) CQ-VW100W...
Features Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company.
¡Be sure to select off when your car has no ACC position in the ignition switch. Failure to do this could cause the battery to go dead. Warning ¡When you connect external devices to this unit, be sure to connect the side brake connection lead (aInstallation Instructions). CQ-VW100W...
Discs Operation on the Main Unit You can use the Main Unit to perform the targeted opera- tion. If the operation is not executable with the Main Unit, Compatible Discs “––” is displayed. Compatible Discs Discos compatibles Compatible Discs CQ-VW100W...
[MAP] Remote control sensor : This book refers to connections to the Panasonic car navigation system that will come onto the market in the future. Descriptions regarding the car navigation system are boxed with a dotted line. q [MUTE] ¡Mutes the sound temporarily.
Setup Screen appears. Select desired setting. Touch desired source button. Setup menu, page 28) Touch to quit. Press [SRC/PWR] to change to desired source. Note : ¡The screen above appears when no external device is connected to this unit. CQ-VW100W...
When the Expansion (CY-EM100N, option). Module (CY-EM100N, ¡ If there is no external option) is connected. HUB2 sources connected, System Upgrade AV1/AV2 mode can be Guidebook) set to skip. page HUB3 HUB4 …… Touch/Press and hold for more than 2 seconds CQ-VW100W...
Page 15
Note: ¡ After adjusting its angle, also adjust the brightness as well. ( page 32) ¡ The car model and installation conditions may impose some restrictions on the adjustment of the monitor's angle. CQ-VW100W...
Hybrid SACD (except CD-DA) CD-EXTRA (audio-only playback possible) ¡ DVDs with a region number other than “2”, “3”, “5” ¡ or “ALL”* ¡ Playing back a photo CD disc with this unit could damage the data that is recorded on the disc. CQ-VW100W...
Page 17
Disc Insert/Eject CQ-VW100W Warning DIMMER TUNE/TRCK TILT TILT MUTE SRC / PWR ¡Do not touch the unit while the display is moving. [u TILT] (eject) Inserting hands, fingers or foreign objects into the unit can cause injuries and damage to the unit.
– To cancel, touch again. DivX DivX DivX Random Play within the – To cancel, touch and hold again. DivX DivX DivX Current Folder …… Touch/Press and hold * Touch panel symbols will change to indicate these current mode. CQ-VW100W...
Page 20
¡If the title/chapter number is inputted and no operation is performed for 8 seconds, playback will start from the num- ber of the title/chapter entered. On-Screen Direct Operation (Only for DVD) Some DVDs allow you to operate the DVD menu by touching the screen. CQ-VW100W...
Page 21
¡The language on the DVD settings takes priority when the power is turned on or the disc is loaded. ¡The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan- guage/angle. CQ-VW100W...
¡ GMC (Global Motion Compensation) is not supported. Caution ¡ Put only “.mp3” files on an MP3-formatted disc. Put only “.DIVX”, “.divx”, “.AVI” and “.avi” files on an DivX-formatted disc. Otherwise, abnormal sound may be produced during play which can damage the speaker and your hearing. CQ-VW100W...
Page 23
It is prohibited by copyright laws to copy, distribute and The above description complies with our investigations as of deliver copyrighted materials such as music without the December 2007. It has no warranty for reproducibility and approval of copyright holder except enjoying yourself displayability of MP3/DivX. personally. CQ-VW100W...
Radio Source Selection Source Button Frequency Each indicator q Touch “Source Button”. w Touch CQ-VW100W (Radio) on the Source Selection Screen. Band selection Tuning *List selection Preset stations MUTE DIMMER SRC / PWR SRC / PWR TUNE/TRCK TILT Press [SRC/PWR] to change to the [SRC/PWR] desired mode.
Select the list and hold down the preset number that contains the targeted channel for more than 2 seconds. q is The preset station selected in the step interchanged with the targeted preset chan- – nel selected in the step w (Preset Swap). …… Touch and hold CQ-VW100W...
¡Connect an optional external device to the AV1/AV2. Source Selection Source Button You can view the images and listen to the sounds from the connected external devices in the AV1/AV2 mode respectively. CQ-VW100W q Touch “Source Button”. w Touch (AV1/AV2) on the Source Selection Screen.
34) Menu Language DVD Menu Language Setting page 34) DVD Video Setting page 34) Video Setting Audio Setting DVD Audio Setting page 35) DivX Registration DivX Registration page 35) Radio Radio FM Setup Setting for FM stations page 35) CQ-VW100W...
MUTE DIMMER DIMMER SRC / PWR SRC / PWR TUNE/TRCK TILT [DIMMER] [SRC/PWR] (The screen brightness (Exit from the menu) is toggled between the set level and maximum luminance.) CQ-VW100W...
Page 30
¡Record your registered ID code and keep it in a secure location. (Fill in the ID code memo page 40).) If you forget it, you will be unable to use the unit. In case you forget the ID code, please consult your nearest Panasonic Service Center. CQ-VW100W...
Page 31
Memory Clear Input selection Memory clearance Note: The state of all of the current memories are returned to ¡If a non-Panasonic navigation system is connected to default settings. this unit, we do not guarantee the operations of the Note: navigation system.
Setting range: –15 to +15 Therefore, use the “Normal” mode to see the origi- default: ±0 nal picture as the author intended it. CQ-VW100W...
Page 33
¡For resuming the factory settings, touch and hold for more than 2 seconds . Default Bass/Treble Bass/treble adjustment Bass (Bass adjustment) : more : less Treble (Treble adjustment) : more : less Setting range: –12 dB to +12 dB default: 0 dB CQ-VW100W...
Page 34
: other language. Input the language code. equipment connected to VIDEO OUT. page 43) default: default: English Angle Mark (Angle mark setting) The angle mark is displayed to indicate the parts where multi-angle data is recorded. : activates angle mark. : inactivates angle mark. default: CQ-VW100W...
: made with the greatest compression, roughly equivalent to a TV broadcast. : DR COMP OFF Note : ¡ This function is available only when “Dolby Digital” source is playing. default: DivX Registration Show the DivX Registration Code page 36) CQ-VW100W...
¡ If you purchase DivX VOD content using a registration code different from this unit’s code, you will not be able to play this content. (“Authorization Error” is dis- played.) CQ-VW100W...
Please refer checking and repair to professionals. ¡Never try to repair the unit by yourself Panasonic shall not be liable for any accidents arising out of neg- because it is dangerous to do so. lect of checking the unit or your own repair after your checking.
Disc unejectable The microcontroller in the unit operates abnormally due to noise or other factors. aUnplug the power cord and plug it again. In case the unit is still out of order, consult your dealer. CQ-VW100W...
Page 39
42) for other cases. The audio format is output disabled for this unit such as dts. aUse output enabled discs. Sound is not generated. Refer to “Before Disc Playback” ( page 16) or “Notes on Discs” page 42) for other cases. CQ-VW100W...
Page 40
Model No. CQ-VW100W code... ID CODE In case you forget the ID code, please consult your nearest Panasonic Service Center. ID code memo Copy the memo at right, fill in the ID code, and keep it in a secure location.
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Reset switch Panasonic Service Center. The product should be serviced Insert a hard, slender stick into the hole and push the only by a qualified technician.
Discs with burrs ¡Be sure to observe the handling instructions of CD- Please remove the burrs R/RW, DVD–R/RW discs. before use. ¡This player does not play CD-R/RW, DVD-R/RW discs which contain other than CD-DA or MP3/DivX data. CQ-VW100W...
® at the left and right sides. Plays all versions of DivX video with standard play- ® back of DivX ® media files DivX,DivX Certified, and associated logos are trade- marks of DivX, Inc. and are used under license. CQ-VW100W...
¡Some figures and illustrations on this manual may be different from your product. Playable region number This operating instruction manual is for 3 models CQ-VW100W2/CQ-VW100W3 and CQ-VW100W5. The following table shows the playable region number for each model. Model Playable region number CQ-VW100W2 2 (ALL) CQ-VW100W3 3 (ALL) CQ-VW100W5 5 (ALL) CQ-VW100W...
Page 46
CQ-VW100W Matsushita Electric Industrial Co., Ltd. Web Site : http://panasonic.net YFM264C061CA PTW1107-1018 Printed in China...