hit counter script

Key To Symbols; Symbols On The Machine; Symbols On The Battery And/Or On The Battery Charger; Symbols In The Operator's Manual - Husqvarna 536LiP4 Operator's Manual

Hide thumbs Also See for 536LiP4:
Table of Contents

Advertisement

Available languages

Available languages

Symbols on the machine:

Translation of the original Swedish operating instruction.
DANGER! A pole saw is a dangerous
tool if used carelessly or incorrectly and
can cause serious, even fatal injuries. It
is extremely important that you read
and understand the contents of this
Operator's Manual. Please read the
operator's manual carefully and make sure you
understand the instructions before using the machine.
Always wear:
A protective helmet where there is a
risk of falling objects
Approved hearing protection
Approved eye protection
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Symbols on the product or its packaging
indicate that this product cannot be
handled as domestic waste. This product
must be deposited at an appropriate
recycling facility. (Applies to Europe only)
Arrows which show limits for handle
positioning.
Direct current.
Keep all parts of your body away from the
hot surfaces.
Chain oil fill.
This machine is not electrically insulated.
If the machine touches or comes close to
high-voltage power lines it could lead to
death or serious bodily injury. Electricity
can jump from one point to another by
arcing. The higher the voltage, the
greater the distance electricity can jump.
Electricity can also travel through
branches and other objects, especially if they are wet.
Always keep a distance of at least 10 m between the
machine and high-voltage power lines and/or any objects
that are touching them. If have to work within this safe
distance you should always contact the relevant power
company to make sure the power is switched off before
2 – English

KEY TO SYMBOLS

you start work. This machine has a long reach. Make sure
that no people or animals come closer than 15 m when
the machine is running.
Direction of rotation of the saw chain,
running time/Idling.
Symbols on the battery
and/or on the battery charger:
This product must be deposited
at an appropriate recycling
facility. (Applies to Europe only)
Fail-safe transformer
Use and store battery charger only
indoors.
Double insulation
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
Symbols in the operator's
manual:
The engine is switch off by pressing the
stop button. Always remove the battery
to prevent the machine being started by
accident.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Remove the battery. IMPORTANT!
Always remove the battery to prevent
the machine being started by accident.
Li-ion
Li-ion

Advertisement

Table of Contents
loading

This manual is also suitable for:

536lipt5

Table of Contents