16
iNSTALLATiON iNSTruCTiONS
Reversing the door
WArNiNg
w
• To avoid damage to the dryer or the door, support
the door with a stool or box that fits under the
door, or have an assistant support the weight of
the door.
• Always reverse the door BEFORE stacking the
dryer on top of the washer.
• Avoid dropping the door to avoid damage to the
door or the floor.
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure
to follow the instructions below can result in damage
to the dryer, property damage or injury to persons.
1. Open the dryer door.
2. You will be removing the screws shown below
(4 on left, 2 on right).
3. Remove the two decorative screws on the left using a
screwdriver.
MFL67731035_en_140818.indd 16
4. Remove the two latch screws and the latch.
Latch Screw
Be sure to support the weight of the door before
removing the hinge screws.
5. Hold the hinge in place while removing the two hinge
Open Door
6. Remove the door from the cabinet cover.
Decorative
Hinge
Screw
CAuTiON
screws (to prevent the door from dropping).
Hinge Screw
Remove
Door
2014.8.18 9:36:35 AM