Power Trim And Tilt Switch On Bottom Cowling; Variable Trolling Rpm Switches - Yamaha F100D Owner's Manual
Hide thumbs
Also See for F100D:
- Owner's manual (88 pages) ,
- Service manual (249 pages) ,
- Owner's manual (78 pages)
Table of Contents
Advertisement
ing the switch "
" (down) tilts the outboard
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position.
For instructions on using the power trim and
tilt switch, see pages 55 and 57.
EMU26156
Power trim and tilt switch on bottom
cowling
The power trim and tilt switch is located on
the side of the bottom cowling. Pushing the
switch "
" (up) trims the outboard motor up,
and then tilts it up. Pushing the switch "
(down) tilts the outboard motor down and
trims it down. When the switch is released,
the outboard motor will stop in its current po-
sition.
For instructions on using the power trim and
tilt switch, see page 57.
EWM01032
WARNING
Use the power trim and tilt switch located
on the bottom cowling only when the boat
is at a complete stop with the engine off.
Attempting to use this switch while the
boat is moving could increase the risk of
falling overboard and could distract the
operator, increasing the risk of collision
with another boat or an obstacle.
UP
DN
1. Power trim and tilt switch
EMU30902
Variable trolling RPM switches
The trolling speed can be adjusted when the
outboard motor is trolling. Press the "
switch to increase the trolling speed and
press the "
" switch to decrease the trolling
speed.
"
1. Variable trolling RPM switch
Components
1
ZMU04231
"
23
Advertisement
Table of Contents
