hit counter script

Receiver; Yamaha Security System Lock And Unlock Mode; Remote Control Box; Remote Control Lever - Yamaha F100D Owner's Manual

Hide thumbs Also See for F100D:
Table of Contents

Advertisement

Components
EMU38602

Receiver

The receiver control the ECM (Electronic con-
trol module) to prevent the engine from start-
ing. Consult your Yamaha dealer for
installation of the receiver.
EMU38612
Yamaha Security System lock and un-
lock mode
The Yamaha Security System settings are se-
lected by pressing the lock or unlock button
on the remote control transmitter briefly.
1
1. Lock button
2. Unlock button
LOCK
When the lock button on the remote control
transmitter is pressed briefly, the beeper
sounds once. This indicates the lock mode is
selected and the engine cannot be started.
The lock mode is selected only when the
main switch is in the "
engine cranks but can not be started while
the Yamaha Security System is on lock
mode.
UNLOCK
When the unlock button on the remote con-
trol transmitter is pressed briefly, the beeper
sounds twice. This indicates the unlock mode
is selected and the engine can be started.
18
2
ZMU06456
" (off) position. The
Yamaha
Security
Number
System
of beeps
mode
Lock
1 beep
Unlock
2 beeps
EMU26182

Remote control box

The remote control lever actuates both the
shifter and the throttle. The electrical switch-
es are mounted on the remote control box.
1. Power trim and tilt switch

2. Remote control lever

3. Neutral interlock trigger
4. Neutral throttle lever
5. Main switch
6. Engine shut-off switch
7. Throttle friction adjuster
EMU26191
Remote control lever
Moving the lever forward from the neutral po-
sition engages forward gear. Pulling the lever
back from neutral engages reverse. The en-
gine will continue to run at idle until the lever
is moved about 35° (a detent can be felt).
Moving the lever farther opens the throttle,
and the engine will begin to accelerate.
Engine
Main
can be
switch
started
"
"
NO
"
"/
YES
"
"

Advertisement

Table of Contents
loading

This manual is also suitable for:

F80b

Table of Contents