Table of Contents
Advertisement
joint to the carburetor fittings and the rubber joint
manifold fittings for an air-tight seal. Tighten all fit-
1
tings securely to avoid the possibility of unfiltered
air entering the engine.
2
ECB00460
NOTICE
3
G
Make sure that the air filter element is prop-
4
erly seated in the air filter case.
G
Never operate the engine with the air filter el-
5
ement removed. This will allow unfiltered air
to enter the engine, causing rapid engine
6
wear and possible engine damage. Addition-
ally, operation without the air filter element
7
will affect carburetor jetting with subsequent
poor performance and possible engine over-
8
heating.
9
EBU28310
Cleaning the spark arrester
10
Be sure the exhaust pipe and muffler are cool be-
fore cleaning the spark arrester.
11
1. Remove the screws.
1. Screw
2. Remove the tailpipe by pulling it out of the
muffler.
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from the
spark arrester portion of the tailpipe and inside
of the tailpipe housing.
8-21
1
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
