Table of Contents
Advertisement
EWB00400
WARNING
Always adjust the shock absorber assemblies
on the left and right side to the same setting.
Uneven adjustment can cause poor handling
and loss of stability, which could lead to an ac-
cident.
EBU19100
Adjusting the rear shock absorber
assembly
The spring preload, rebound damping and com-
pression damping forces of the rear shock absorb-
er assembly can be adjusted to suit the rider's
weight and the riding conditions.
EWB00430
WARNING
This shock absorber assembly contains highly
pressurized nitrogen gas. Read and under-
stand the following information before han-
dling the shock absorber assembly.
G
Do not tamper with or attempt to open the
cylinder assembly.
G
Do not subject the shock absorber assembly
to an open flame or other high heat source.
This may cause the unit to explode due to ex-
cessive gas pressure.
G
Do not deform or damage the cylinder in any
way. Cylinder damage will result in poor
damping performance.
G
Do not dispose of a damaged or worn out
shock absorber assembly yourself. Take the
shock absorber assembly to a Yamaha deal-
er for any service.
Spring preload
1. Loosen the locknut.
2. Turn the adjusting nut in direction (a) to in-
crease the spring preload and thereby harden
the suspension, and in direction (b) to de-
crease the spring preload and thereby soften
the suspension.
4-13
1
2
3
4
5
6
7
8
9
10
11
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
