hit counter script

V-Belt Case Drain Plug; Adjusting The Carburetor; Adjusting The Engine Idling Speed - Yamaha GRIZZLY 350 YFM35FGY Owner's Manual

Table of Contents

Advertisement

EBU23930

V-belt case drain plug

After riding in water deep enough to allow it to en-
ter the V-belt case, remove this plug to drain the
water from the case.
TIP
If water drains from the V-belt case after removing
the plug, have a Yamaha dealer check the ATV as
the water may affect other engine parts.
8
1. V-belt case drain plug
EBU23940

Adjusting the carburetor

The carburetor should be checked and, if neces-
sary, adjusted at the intervals specified in the peri-
odic maintenance and lubrication chart. The
carburetor is an important part of the engine and
requires very sophisticated adjustment. Therefore,
most carburetor adjustments should be left to a
Yamaha dealer, who has the necessary profes-
sional knowledge and experience. The adjustment
described in the following section, however, may
be performed by the owner as part of routine main-
tenance.
ECB00480
NOTICE
The carburetor has been set and extensively
tested at the Yamaha factory. Changing these
settings without sufficient technical knowl-
edge may result in poor performance of or
damage to the engine.
EBU24000

Adjusting the engine idling speed

The engine idling speed must be checked and, if
necessary, adjusted as follows at the intervals
specified in the periodic maintenance and lubrica-
tion chart.
8-24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents