hit counter script
Toro 04202 Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower
  5. 04202 Greensmaster Flex 21
  6. Operator's manual
Toro 04202 Operator's Manual

Toro 04202 Operator's Manual

11 and 14 blade cutting units
Hide thumbs Also See for 04202:
Table of Contents

Advertisement

Quick Links

Form No. 3367-393 Rev A
11 and 14 Blade Cutting Units
Greensmaster
®
Flex 18 and Flex 21 Traction
Units
Model No. 04202—Serial No. 311000001 and Up
Model No. 04206—Serial No. 311000001 and Up
Model No. 04207—Serial No. 311000001 and Up
Model No. 04208—Serial No. 311000001 and Up
To register your product or download an Operator's Manual or Parts Catalog at no charge, go to www.Toro.com.
Original Instructions (EN)

Advertisement

Table of Contents
loading

Related Manuals for Toro 04202

Summary of Contents for Toro 04202

  • Page 1 Model No. 04206—Serial No. 311000001 and Up Model No. 04207—Serial No. 311000001 and Up Model No. 04208—Serial No. 311000001 and Up To register your product or download an Operator's Manual or Parts Catalog at no charge, go to www.Toro.com. Original Instructions (EN)

  • Page 2: Table Of Contents

    Adjusting the Height of Cut ........5 additional information, contact an Authorized Service Adjusting the Cut-Off Bar ........6 Dealer or Toro Customer Service and have the model Setting the Machine to Match Turf and serial numbers of your product ready. Figure 1 Conditions ............

  • Page 3: Safety

    Toro replacement parts and not operate the machine; seek shelter. accessories to keep the Toro all TORO. Never use "will-fit" replacement parts and accessories • Keep all shields and safety devices in place. If a made by other manufacturers.

  • Page 4: Operation

    Operation • Place spacers onto screws on roller brackets. • Re-secure roller bracket and spacers to Note: Determine the left and right sides of the underside of sideplate mounting flanges with machine from the normal operating position. nuts previously removed. 3.

  • Page 5: Adjusting The Height Of Cut

    Should excessive reel drag be evident it will be either necessary to backlap or regrind the cutting unit to achieve the sharp edges needed for precision cutting (see Toro reel sharpening manual). Figure 6 Adjusting the Height of Cut 1.

  • Page 6: Adjusting The Cut-Off Bar

    3. Hook screw head on cutting edge of bedknife and rest rear end of bar on rear roller (Figure 10). 4. Rotate adjusting screw until roller contacts front of gauge bar. Adjust both ends of roller until entire roller is parallel to the bedknife. Important: When set properly, the rear and front rollers will contact the gauge bar and the screw will be snug against the bedknife.

  • Page 7: Setting The Machine To Match Turf Conditions

    Setting the Machine to Match Turf Conditions Use the following table to set the machine to match turf conditions. Flex Greensmower Cutting Unit Set-up Matrix Bedbars: Standard and Optional Part Number Description Mower Aggressiveness Comments 106-2468-01 Standard Flex 21 Less Standard 99-3794-03 Aggressive...
  • Page 8 110-2304 Narrow Wiehle Flex 18 2.5 inches (63.5 mm) Standard Front Aluminum 110-2305 Wide Wiehle Flex 18 2.5 inches (63.5 mm) More Penetration Aluminum 110-2306 Full Roller Flex 18 2.5 (63.5 mm) inches Steel Least Penetration 110-2303 Rear Roller Flex 18 2.0 inches (50.8 mm) Standard Rear Aluminum...

  • Page 9: Maintenance

    Maintenance Separating the Cutting Unit from the Traction Unit 1. Place the mower on its drums on a level surface. 2. Lower kick stand. Insert a 1/4 inch (6 mm) diameter pin or equivalent into frame hole above kick stand mounting bolt (Figure 13).

  • Page 10: Servicing The Bedbar

    Servicing the Bedbar Removing the Bedbar 1. Turn the bedbar adjuster screw, counterclockwise, to back the bedknife away from reel (Figure 17). Figure 19 1. Bedbar bolt 3. Nut 4. Nylon washer 2. Steel washer Figure 17 1. Bedbar adjusting screw 4.
  • Page 11 1. Reel drive cover plug 2. Insert a 18 mm socket onto hex flange nut on left end of reel shaft. 3. Backlap according to the procedure in the Toro Sharpening Reel and Rotary Mowers Manual, Form No. 80-300 PT.

  • Page 12: The Toro Total Coverage Guarantee

    Countries Other than the United States or Canada Customers who have purchased Toro products exported from the United States or Canada should contact their Toro Distributor (Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatisfied with your Distributor’s service or have difficulty obtaining guarantee information, contact the Toro importer.

This manual is also suitable for:

042060420704208Greensmaster flex 18Greensmaster flex 21

Table of Contents