Table of Contents
Advertisement
Operation
• Never run an engine in an enclosed area.
• Only operate in good light, keeping away from holes
and hidden hazards.
• Be sure all drives are in neutral and parking brake is
engaged before starting engine.
• Only start engine from the operator's position.
• Be sure of your footing while using pedestrian
controlled equipment, especially when backing up.
• Walk, don't run.
• Never operate on wet grass. Reduced footing could
cause slipping.
• Slow down and use extra care on hillsides. Be sure to
travel in the recommended direction on hillsides.
• Use caution while operating near drop-offs.
• Slow down and use caution when making turns and
when changing directions on slopes.
• Never raise deck with the blades running.
• Never operate with the discharge deflector raised,
removed or altered, unless using a grass catcher.
• Do not change the engine governor setting or
overspeed the engine.
• Stop on level ground and shut off engine before
leaving the operator's position for any reason
including emptying the catchers or unclogging the
chute.
• Stop equipment and inspect blades after striking
objects or if an abnormal vibration occurs. Make
necessary repairs before resuming operations.
• Keep hands and feet away from the cutting units.
• Look behind and down before backing up to be sure
of a clear path.
• Be aware of the mower discharge direction and do
not point it at anyone.
• Do not operate the mower under the influence of
alcohol or drugs.
• Use care when loading or unloading the machine
into a trailer or truck.
• Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
Maintenance and Storage
• Wait for all movement to stop before adjusting,
cleaning or repairing.
• Clean grass and debris from cutting unit, muffler,
and engine to help prevent fires.
• Clean up oil or fuel spillage.
• Let engine cool before storing and do not store near
flame.
• Do not store fuel near flames or drain indoors.
• Never allow untrained personnel to service machine.
• Use care when checking blade.
• Wrap the blade or wear gloves, and use caution when
servicing.
• Only replace blade. Never straighten or weld them.
• Keep hands and feet away from moving parts.
• If possible, do not make adjustments with the engine
running.
• Keep all parts in good working condition and all
hardware tightened.
• Replace all worn or damaged decals.
5
Advertisement
Table of Contents
