Page 2
iPod iPod SIRIUS/XM (X34-634) DC CN V-JACK A-JACK TV I/F JACK KAB IF JACK (X89-306) TV MC REQ SAT RX TV SC CON SAT TX DISTRIBUTOR TV JUDGE SIR DET SAT RST (X29-449) TV SC REQ SIR PON SAT CON TUN SMET TV SC DATA BU DET...
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT COMPONENTS DESCRIPTION ● VIDEO CONTROL UNIT (X15-123x/134x-xx) Ref. No. Application / Function Operation / Condition / Compatibility Regulator For BU5V Regulator IC Regulator For BU3.3V Regulator IC OP-AMP X 2 For Audio Reference 4V IC101 DCDCcontrol IC Mecha8V/D,P,V5V DCDCconvertor IC...
Page 4
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT COMPONENTS DESCRIPTION Ref. No. Application / Function Operation / Condition / Compatibility Q101 SW FET DCDC SW FET (Mecha8V) Q102 SW FET DCDC SW FET (D5V) Q103 IC101 DCDC control1 Q104 IC101 DCDC control2 Q105 Tilt Speed control sw...
Page 5
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT COMPONENTS DESCRIPTION ● ELECTRIC UNIT (X34-634x-xx) Ref. No. Application / Function Operation / Condition / Compatibility IC101 3-terminal regulator A8V Power Supply IC103 3-terminal regulator SimpleDSP5V / CODEC8V Power Supply IC104 3-terminal regulator T8V Power Supply IC106 3-terminal regulator...
Page 6
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT COMPONENTS DESCRIPTION Ref. No. Application / Function Operation / Condition / Compatibility Regulator 1.8V regulator Regulator 3.3V regulator IC200 F ROM QVGA MODEL (MP) for Mstar FW IC200 F ROM VGA MODEL (MP) for Mstar FW IC201 Chroma and Gamma T/C scalar...
Page 7
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT COMPONENTS DESCRIPTION ● DVD UNIT (X37-1250-00) Ref. No. Application / Function Operation / Condition / Compatibility RF signal processing IC RF signal processing FLASH ROM Maintain F/W for optical DISC control IC Optical disc control IC in μ-com...
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT MICROCOMPUTER’S TERMINAL DESCRIPTION ● MICROCONTROLLER IC 30878MJBA35GP (X15- : IC201) Truth Value Pin No. Pin Name Application Processing/Operation/Description Table EVOL_SDA/ I/O Communication data with E-VOL EVOL_SDA EVOL_SDA/ I/O Communication data with AVSEL AVSEL_SDA EVOL_SDA/ I/O Communication data with E2P...
Page 9
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Value Pin No. Pin Name Application Processing/Operation/Description Table VCC1 ACC_DET ACC detection H: ACC reduced voltage detection BU_DET Backup power detection H: Backup power reduced voltage detection R_CLK Clock input from RDS decoder Not used. Input is fi xed to Hi Not used.
Page 10
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Value Pin No. Pin Name Application Processing/Operation/Description Table Output is fi xed to L (Illumination control of the NC (VALL_G) Not used. Output is fi xed to L variable illumi “G” when this terminal is used)
Page 11
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Value Pin No. Pin Name Application Processing/Operation/Description Table TYPE_PRE/VSEL/ 8 functions: Video selector control L: Other than NAVI, H: NAVI VSEL TYPE_PRE/VSEL/ 6 functions: H: 5V, L: 2V TYPE_PRE 2VPRE/5VPRE destination detection BE_SDATA Communication from backend...
Page 12
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Value Pin No. Pin Name Application Processing/Operation/Description Table H: Relay ON, L: Relay OFF RELAY_SW2 Relay 2 control Fixed to L in the product whose destination does not need relay. MST_RST MSTAR system reset...
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE 1. General information 1.1. Purpose 1.2. Scope of application This document is prepared to clarify necessary information This document is applied for the models described in Table on the Test mode used at the production processes and at 1.2.1.
Page 15
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE Test Mode Main Direct Power Information Service Touch Illumi iPod Tilt Mecha Bluetooth Ext SW Navigation Select Frequency Source/ Touch Inverter & Mecha Navigation Audio/ Step1 iPod Check LOOPBACK Adjust DC/DC Adjust Check setup E2PROM Adjust...
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE * Key itself is inactively displayed for the models which do The models which do not support the functions are de- not support the functions. scribed in the Table 2.3.2. The models which do not support the functions are de-...
Page 17
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE • DivX Registration Code * Select black for the background color until “Write OK/NG” Display DivX Registration Code, and clear the Code with is displayed. [Clear] key. Modify the background color to blue at the same time as After the clearing of the Code, display “None”.
Page 18
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE 2.3.6. DVS-8000 Adjustment screen Key Specifi cation Cancel : When the Cancel button is pressed while enter- This is to display DVS-8000 Servo Adjustment screen. (As ing the 1st point, the system transfers to the for the details of the adjustment procedures, refer to the Test Mode Main screen.
Page 19
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE 2.3.11. LCD Adjustment screen Up/Down (Green) : Green Offset key. (This key is displayed only This screen is used to perform adjustment of LCD. when the Green Offset mode is turned ON) The displayed contents of the LCD Adjustment screen is Up/Down (Blue) displayed in Figure 2.3.11.
Page 20
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE 2.3.14. Tilt Mecha Adjustment screen Key Specifi cation : Flicker Adjustment. (The topmost part is MIN This screen is used to perform adjustment of the Panel and the lowermost part is MAX.) Mechanism. Touching an arbitrary part sets a preset value The Tilt Mecha Adjustment screen is displayed in Figure according to the places.
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE 2.3.15. Bluetooth Confi rmation screen * Details of the counter-machine for exclusive use of the Test mode Perform LOOPBACK test with the other Bluetooth device in Only Bluetooth Module selected as a counter-machine the line. is displayed on the device list to shorten the connection The Bluetooth Confirmation screen is displayed in Figure time.
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE 2.4.2. Key 2.4.5. Tuner Even in the Test mode, the specifi cations of the hard key • When unable to access E2PROM, display Error (on the shall be the same as while in normal operation. Tuner screen).
Page 23
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE 2.4.8. TV For DVD audio checking. For in the case that the connected TV Tuner Box is the E Title Chapter Audiostream destination only, modify the setting as described in Table 1kHz, 0dB PCM48k/24bit Audiostream2 2.4.8.
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE 2.4.10. AV IF 2.4.14. Clear the contents in the nonvolatile memory (E2PROM etc.) • The settings in the Test mode are described in Table 2.4.8. (The settings of items which are not listed in the table are •...
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT TEST MODE as “Check NG” is displayed. • The following items shall be checked. 1) When the unit is Reset or is powered on after the backup Application Processor Version OFF under the Security ON condition, the unit boots up System μ-com Version and ROM correction number...
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT ADJUSTMENT 1. VCOM/AGC/WB/HPOSI AUTO adjustment 2. Screen position adjustment and Touch panel operation • Input signal White Raster 100% (Composite signal from Signal gen- • Input signal erator) No signal • Adjustment & Inspection method • Adjustment & Inspection method Test mode is started.
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT ADJUSTMENT 3. Flicker adjustment 4. Illumination adjustment • Input signal • Input signal No signal No signal • Adjustment & Inspection method • Adjustment & Inspection method Test mode is started. Test mode is started. It is touches in order “Illumi” of the <1>...
Page 28
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT ADJUSTMENT Picture w for LED_WB adjustment is displayed. Picture e for LED_WB adjustment is displayed. Decides from four lines of Red/Green/Blue/Yellow wheth- Adjust it so that LED of the panel left becomes the color er you became the color what color of the LED of the (white) that is the nearest to the LED of the right side in a panel right side- similar sample set white.
Page 29
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT PC BOARD PC BOARD (COMPONENT SIDE VIEW) (FOIL SIDE VIEW) SWITCH UNIT SWITCH UNIT X16-6560-10 X16-6560-10 (J76-0592-02) (J76-0592-02) SUB-CIRCUIT UNIT X16-6590-2x (J76-0604-02) SUB-CIRCUIT UNIT X16-6590-2x (J76-0604-02) R1 R2 X16-6590-2x X16-6590-2x Ref. No. Address Ref. No. Address X16-6560-10 Ref. No.
Page 43
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT PC BOARD (FOIL SIDE VIEW) DVD UNIT X37-1250-00 (J76-0620-02) DGND IC11 AGND SW EJEND CP5 CP6 CP7 CP8 D3.3V CP10 VREF1 SW LOST MON1 1.5V MON5 R289 MON4 RFENV CD LD DVD LD JITOUT VREF2 WBLIN C452 JLINE...
Page 44
SPDIF iPod USB1 USB2 DC/SP MST WRITE SYS WRITE ROMULATOR TV-TUNER J500 J701 J702 J600 CN701 W600 J650 FM/AM POWER BLUETOOTH UNIT FRONT BLUETOOTH MIC IN (X15- ) VIDEO CONTROL UNIT ELECTRIC UNIT (B/2) (X15-123/134) (A/2) (X34-634) NAVIGATION BACK CN202 CN401 CN700 CN301...
Page 66
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT CAUTION : For continued safety, re place safe ty critical com po nents only with manufacturer’s rec om mend ed parts (refer to parts list). Indicates safety critical com po nents. To reduce the risk of electric shock,...
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT EXPLODED VIEW (DVD MECHANISM) M1.7x2 : N09-6382-05 : N09-6408-15 φ1.7x4 M2x2 : N09-6426-15 : N09-6104-05 φ2x10 Inscriptions (register marks) on gears Align 6 marks as shown in the figure Drive gear 5 Drive gear 4C Parts with the exploded numbers larger than 700 are not supplied.
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT EXPLODED VIEW (PANEL) Illustrations is RC-DV330 SIZE AAA BATTERY (NOT SUPPLIED) M2x3 N09-6489-05 WASHER (1.2x3.2) N19-2332-04 M2x3 N35-2003-48 (X35-) (B/2) (X35-)(A/2) (X16-656) LCD1 FPC2 329 321 Depends on the models. Refer to the parts list. Parts with the exploded numbers larger than 700 are not supplied.
Page 74
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT EXPLODED VIEW (DRIVE MECHANISM) M2x2.5 N09-6361-05 M1.7x3.7 N09-6363-05 M2x2.5 N09-6375-05 M2x3.5 N09-6376-05 M2x2.5 N09-6377-05 N09-6378-05 φ2x2 M2.6x4 N09-6379-05 WASHER N19-2321-04 Parts with the exploded numbers larger than 700 are not supplied.
Page 102
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT SPECIFICATIONS (K,R TYPE) Monitor section FM tuner section Picture Size ........ 6.95 inches (diagonal) wide Frequency Range ..........156.2 mm (W) x 82.4 mm (H) 200 kHz ......... 87.9 MHz – 107.9 MHz Display System ......Transparent TN LCD panel 50 kHz .....87.5 MHz –...
Page 103
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT SPECIFICATIONS (K,R TYPE) External SW Time alignment ........0 – 17 ft (0.07 ft Step) ............0 – 440 cm (2 cm Step) Maximum Power Supply Current ......500 mA Position ..........0 – 5.67 ft (0.07 ft Step) ............0 –...
Page 104
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT SPECIFICATIONS (E,Q TYPE) DSP Section (DNX7240BT only) Profi le ....HFP (Hands Free Profi le), SPP (Serial Port Profile), HSP (Headset Profile), A2DP (Advanced Audio Graphics equalizer Distribution Profi le), AVRCP (Audio/Video Remote Con- Band ..............5 Band trol Profi le), OPP (Object Push Profi le), PBAP (Phonebook Frequency (BAND1 –...
Page 105
DDX6034/6034M/6054/7034BT/7034BTM/714 DNX7000EX/7140/7240BT/7340BT SPECIFICATIONS (M,X TYPE) Monitor section Maximum Communication range ........Line of sight approx. 10m (32.8 ft) Picture Size ........ 6.95 inches (diagonal) wide Profi le ....HFP (Hands Free Profi le), SPP (Serial Port ..........156.2 mm (W) x 82.4 mm (H) Profile), HSP (Headset Profile), A2DP (Advanced Audio Display System ......
Page 106
Position ..........0 – 170 cm (2 cm Step) Navigation section (DNX models only) Receiver ........High-sensitivity GPS receiver KENWOOD follows a policy of continuous advancements Reception Frequency ..... 1575.42 MHz (C/A code) in development. For this reason specifications may be Acquisition Times changed without notice.