Operating Instructions VACUUM CLEANER ❈ Before operating this unit, please read the instructions carefully. ❈ For indoor use only. Register your product at www.samsung.com/register DJ68-00341C REV(0.5)
IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING: Do not use the vacuum cleaner when rug or floor is wet. Do not use to suck up water.
ASSEMBLING THE CLEANER OPTION OPTION OPTION Features may vary according to model. For storage, park the floor nozzle. Tool storage...
Page 5
OPERATING YOUR CLEANER 2-1 POWER CORD 2-2 ON/OFF SWITCH NOTE : When removing the plug from the socket, please take care to grasp the plug, not the cord in order to avoid undue stress. 2-3 POWER CONTROL(VOLUME TYPE ONLY) MIN = For delicate fabrics, e.g. net curtains.
Page 6
2-6 USING FLOOR TOOLS OPTION OPTION OPTION Floor Nozzle Dusting Crevice Detach transparent drum OPTION cover for easy cleaning. OPTION Cut off pet hairs or threads Blanket brush Bedclothes or Blanket surrounding brush by using scissors. Features may vary according to model.
DUSTING BRUSH CREVICE TOOL - Dusting brush for - Crevice tool for radiators, - For efficiency. clean furniture. shelves, crevices, corners, Floor Nozzle with books, etc. between cushions. Crevice Tool. INDICATOR LIGHTS When the indicator color has changed Please replace the dust bag. 3-1 CHANGING THE DUST BAG 3-2 FOR CLOTH BAG (OPTION) After using, if the cloth bag is full of dust, clean the cloth bag and use it again.
Page 8
CYCLONIC FILTER(ONLY CYCLONIC FILTER TYPES) You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and it maintain the maximum cleaning efficiency. The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and dust revolves in the Cyclonic Filter.
Page 9
- IF YOU HAVE A PROBLEM PROBLEM CAUSE REMEDY No power supply. Check cable, plug and Motor does not start. Thermal cut-out. socket.Leave to cool. Suction force is gradually Nozzle, suction hose or Remove the object. decreasing. tube is blocked. Check that the cord is not Pull the cord out 2-3m and push Cord does not rewind fully.