w
e
q
EMU00209
Controls
8 Check throttle, shift, and steering for
8 The controls should work smoothly,
8 Look for loose or damaged connec-
8 Check operation of the starter and stop
EMU00210
Engine
8 Check the engine and engine mounting.
8 Look for loose or damaged fasteners.
8 Check the propeller for damage.
EMU01436
CHECKING THE ENGINE OIL LEVEL
q
1) Put the outboard motor in an upright
2) Pull out the oil dipstick and wipe it
3) Completely re-insert the dipstick and
4) Check the oil level using the dipstick
000822
1 Oil dipstick
2 Lower level mark
3 Upper level mark
201012
3-5
proper operation before starting the
engine.
without binding or unusual free play.
tions.
switches when the outboard motor is in
the water.
position (not tilted).
clean.
pull out it again.
to be sure the level falls between the
upper and lower marks. Fill with oil if
it is below the lower mark, or drain to
the specified level if it is above the
upper mark.
GB