Operating Instructions (For Copy & Network Scan Functions) Digital Imaging Systems DP-8020E / 8020P / 8016P Model No. Before operating this machine, please carefully read this manual, and keep this documentation in a safe place for future reference. English (Illustration shows optional accessories that may not be installed on your machine.)
Getting To Know Your Machine Symbols/Icons The following Symbols/Icons are used throughout this operating instructions manual. Place original(s) on the ADF/i-ADF Getting to know your machine Before starting Place original on the Platen (Book) When making copies Place original on the Platen (Sheet) Press any Hard Key on the Control Panel...
Safety Information For Your Safety To prevent severe injury and loss of life, read this section carefully before using the Panasonic DP-8020E/8020P/8016P to ensure proper, and safe operation of your machine. ■ This section explains the Warnings and Cautions used in this Operating Instructions manual.
Page 8
Once a month, unplug the machine and check the power cord for the following. If you notice any unusual condition, contact your authorized Panasonic dealer. ● The power cord is plugged firmly into the receptacle.
Page 9
Place the machine on a level and sturdy surface that can withstand a weight of 95 lb (43.3 kg) (DP-8020E) / 93 lb (42.3 kg) (DP-8020P/8016P). If tilted, the machine may tip-over and cause injuries.
Getting To Know Your Machine Safety Information For Your Safety CAUTION Consumable Safeguards Be sure to use the specified type of batteries only. Ensure that batteries are installed with correct polarity. Incorrectly installed batteries can burst or leak, resulting in spillage or injuries. Others ■...
Precautions Precautions ■ Laser Safety LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Output Tray more often to avoid paper jams. ■ Use of other than genuine Panasonic supplies can damage the machine. This may void the warranty of the machine and supplies. Be sure to use only genuine Panasonic Toner designed for the machine.
Page 13
Handling ■ Do not turn the Power Switch Off, or open the Front Cover during copying/printing. ■ Sleep/Shutdown Mode Notice ● The following functions will not work if the Sleep/Off Mode setting is set to the Shutdown mode. When using any of the following functions, we recommend that you leave the Sleep/Off Mode in the initial factory default setting (Sleep mode).
Original Guides ∗ ∗ ∗ ∗ ∗ Tray If set to other Adjust to the (Max. 50 Letter function mode original's width size originals) (DP-8020E/8020P ∗ ∗ ∗ ∗ ∗ Hold the guides by the center when only) adjusting the width Original Guides From Platen Face Down ●...
If the memory overflows while scanning originals, the message “MEMORY FULL CONTINUE? 1:YES 2:NO” will appear on the LCD. If this occurs, follow the instructions on the LCD. If this occurs frequently, adding optional memory is recommended, consult with an authorized Panasonic dealer. Downloaded From ManualsPrinter.com Manuals...
● Replacing Toner Bottle/Toner Waste Container Front Cover ATTENTION ● For optimum copy quality Toner Waste Container use the recommended Panasonic Toner. Store Toner Bottle in a cool dark place. Do not unseal the Toner Bottle unless you are ready to use it. Corona Cleaner...
Page 17
Release Heat Roller Cover Jam Removal Knob Paper Tray Lift Upward and insert the Tray Downloaded From ManualsPrinter.com Manuals...
Page 18
● Removing Misfed Paper (ADF: Option for DP-8020E/8020P/8016P) (J70, J71, J79, J92, J93) (Ex.) REMOVE MISFED PAPER Misfed Paper ADF Cover ● Removing Misfed Paper (i-ADF: Option for DP-8020E) (J70, J71, J72, J73, J76, J78, J79, J92, J93) (Ex.) REMOVE MISFED PAPER ADF Cover Misfed Paper...
Page 19
Misfed Paper ADF Cover Misfed Paper Exit Unit ADF Tray Misfed Paper ADF Cover Misfed Paper Paper Tray Lift Upward and Pull Out Misfed Paper Downloaded From ManualsPrinter.com Manuals...
Getting To Know Your Machine Operation Chart ■ Problem Solving ● Removing Misfed Paper (J19, J32, J82, J85, J87: ADU for DP-8020E only) REMOVE MISFED PAPER Left Cover Misfed Paper ● User Error Codes (U Code) Code Check Points Code Check Points Front and/or Left Cover is open.
Misfed Paper Misfed Paper Jam Removal Left Cover Knob Note: • Do not pull Misfed Paper from the front, it may cause damage. ● Jam Error Codes (J Code) Code Check Points Code Check Points Remove paper from the Sheet Bypass. J30, Remove misfed Paper.
DUPLEX Key DOUBLE EXPOSURE Key Selects a 2-Sided or 1-Sided Selects Double Exposure copy. (See pages 27-31) mode. (See page 37) 2-Sided Copy: DP-8020E only N in 1 Key SORT Key Selects N in 1 copy mode. Selects Electric Sort mode.
Page 23
∗ Used for Fax, Internet Fax, and Email Functions. (except for the ABBR Key, see page 50.) Icon Contents Icon Contents PAPER TRAY Key Warning Indications Selects the paper tray. When unit is used as a photocopier. : Add Paper (See page 14) Cursor Key : Replace Toner Bottle To select the zoom...
LGL: Legal, LDR: Ledger do not close ∗ ∗ ∗ ∗ ∗ ADF for DP-8020E/8020P/ the ADF/i-ADF. 8016P i-ADF for DP-8020E only ■ Copying with Preset or Variable Zoom Ratios Preset Ratios (ex: Enlargement) For ADF Invoice For i-ADF Letter...
Adjust to the original's width ● Stapled originals ∗ ∗ ∗ ∗ ∗ ADF for DP-8020E/8020P/8016P ● Freshly printed copies from a laser printer i-ADF for DP-8020E only ● Originals with fresh White-Out (Liquid paper correction fluid) For Preset Ratios For Variable Zoom Ratios...
Making Copies Creative Features ■ 1 2 Copy, 2 2 Copy, 2 1 Copy (DP-8020E with optional i-ADF) 2 Copy 1-Sided 2-Sided Copy For i-ADF From Platen only for 2 Copy 2-Sided 2-Sided Copy 2 Copy : Ledger : Legal...
Page 27
From Platen Bind Position only. 1-Sided Original (Select within 10 sec.) to 2-Sided Copy (For 1 2 Copy, 2 1 Copy) 2-Sided Original to 2-Sided Copy Long Edge Number of Copies (Max. 999) 2-Sided Original Short Edge to 1-Sided Copy The following steps, illustrate how to make multiple copies when the Sort Mode is selected.
Making Copies Creative Features ■ 2 2 Copy (DP-8020E with optional ADF) 1 Copy (DP-8020E/8020P ∗ ∗ ∗ ∗ ∗ /8016P with optional ADF) For ADF only Copying 2 2 or 2 1 Copy with optional ADF (not i-ADF) 2 Copy...
Page 29
Bind Position (Select within 10 sec.) (For 2 1 Copy only) Long Edge Number of Copies (Max. 999) Short Edge PRESS START TO SET ORIGINALS ON ADF CONTINUE NOTE: If the page count for the Back side does not match the page count for the Front side (i.e.
Making Copies Creative Features ■ Book 2 Copy (DP-8020E only) For Book Format is Flipping: Book 2-Sided Copy The book format and page order can be set in the Copier Settings, Parameter No. 14 (BOOK 2 DEFAULT). (See page 58)
Page 31
For Sort Mode only Select Book Original to 2-Sided Copy ∗ Number of Copies (Max. 999) ∗ NOTE: The copy size will be automatically selected. If the selected paper size is not set into the paper tray(s), set paper on the Sheet Bypass (see page 14) or select another Exits this copy size with COPY SIZE Key (See page 25).
Making Copies Creative Features ■ N in 1 From two/four 1-Sided originals, side by For ADF side, to 1-Sided pages. ● 2 in 1 Copy For i-ADF From Platen only ● 4 in 1 Copy : Ledger : Legal : Letter : Letter-R NOTE: : Invoice...
Page 33
For Preset Ratios For Variable Zoom Ratios : Ledger : Legal : Letter Up to 200% in 1% : Letter-R Down to 50% in 1% : Invoice-R Step 7 to 11 for Platen only ANOTHER ORIGINAL? 1:YES 2:NO 1: YES Go to next step.
Making Copies Creative Features ■ 2 Page Copy Copying two facing pages or a Ledger size original on two separate Letter size sheets. Platen Example: Ledger size original Ledger Page Order: L→R Starts copying from the Left page Letter Ledger Page Order: R→L The following steps, illustrate how to make multiple copies Starts copying from...
Page 35
Ledger or Letter Select a Copy size only ∗ Size ∗ Original Size Copy Size Letter Ledger Letter-R Number of Copies Letter Invoice (Max. 999) ∗ NOTE: 1 If the selected original size is not corrected, the book original image will not be copied correctly. ∗...
Making Copies Creative Features ■ Double Exposure From 2-Sided originals to 1-Sided copies (side-by-side image). Original Size: Copy Size: Letter or Invoice Letter-R ex. Invoice NOTE: When copying portrait original, set the Portrait in the Copier settings, Front Side of Original "1:ORIENTATION of Parameter No.
Page 37
Select Invoice or Letter Number of Copies (Max. 999) The following steps, illustrate how to make multiple copies when the Sort Mode is selected. (See page ANOTHER ORIGINAL? 1:YES 2:NO Back Side of Original 1: YES Continues to copy another original, repeat steps 1 and 4- step 7.
Making Copies Creative Features ■ Erase (Margin/Edge) Margin For ADF Shifts image to left, right, top or bottom. ∗ For i-ADF From Platen only : Ledger Edge : Legal Creates a blank edge. ∗ : Letter : Letter-R : Invoice : Invoice-R NOTE: ∗...
Page 39
ERASE MODE (1-3) 1:MARGIN? ENTER NO. OR ∨ ^ PRESS SET TO SELECT 2:EDGE? PRESS SET TO SELECT This Key will flash. : MARGIN : EDGE Exits this mode. Number of Copies (Max. 999) ERASE MODE (1-3) 3:BOOK? ENTER NO. OR ∨ ^ PRESS SET TO SELECT : Book Exits this...
Making Copies Creative Features ■ Effects (Centering/Image Repeat) Centering Copy image can be centred automatically on selected paper. Open the ADF or Platen Cover Image Repeat Creates continuous copy image on one sheet. Minimum original size: 20 x 20 mm. The dotted line can be set to “None”...
Page 41
EFFECTS (1-2) 1:CENTERING? PAPER TRAY ENTER NO. OR ∨ ^ PRESS SET TO SELECT TRAY-1 ∨ ^ 2:IMAGE REPEAT? PRESS SET TO SELECT : Centering : Image Repeat TRAY-1 TRAY-2 TRAY-3 TRAY-4 BYPASS NOTE: Tray-2, 3 and 4 are options. (See page 69) Exits this mode.
Making Copies Creative Features ■ Sort Sort For ADF Multiple copy sets are sorted automatically. For i-ADF Lights Rotate-Sort Sort mode is Multiple copy sets are sorted automatically and selected. are stored on the Output Tray in alternate direction (rotate). Initial Sort-Rotate Mode is “1:OFF”, this setting can be selected within the Copier's General Settings.
Page 43
From Platen only From Platen only : Ledger : Legal : Letter Number of Copies : Letter-R (Max. 999) : Invoice : Invoice-R PRESS START TO ANOTHER ORIGINAL? CONTINUE 1:YES 2:NO : YES Continues to copy another original, repeat steps 1 and 4- 2 to step 7.
Making Copies Other Features ■ Skyshot Mode Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened. Two types of Skyshot modes can be selected; Digital Skyshot Mode : The scanning area (size) is not pre-determined. Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in advance.
Page 45
: Ledger : Legal Number of : Letter Copies : Letter-R (Max. 999) : Invoice NOTE ● An incorrect position detection of the original may occur when : Invoice-R a strong light shines onto the glass during digital skyshot mode. ●...
Making Copies Other Features ■ Job Build and SADF Mode Special originals (like thin paper, etc.) can be For ADF fed from the ADF Tray and copied continuously using the Job Build and SADF Mode. NOTE: Set the Copier Settings, Parameter No. For i-ADF 12 (SADF DEFAULT) to “OFF”...
Page 47
For ADF Place the next original within 5 Starts the printing For i-ADF sec. of last ejected process. original. Number of Copies (Max. 999) For ADF Place the next original within 5 For i-ADF sec. of last ejected original. Select the Sort mode (30 sheets) Lights Sort mode is...
Making Copies Other Features ■ Interrupt Mode Other Job This mode interrupts the current running copy job and For ADF allows other copy jobs to be processed. For i-ADF (See pages 24-43) ■ Energy Saver (Power Saver Mode, Sleep/Shutdown Mode) These modes save power while the machine is not in use.
Page 49
Other Job is completed Modes Power Consumption Warm Up Time Unavailable Functions Standby Approx. 120 W — ———————— Power Saver Approx. 19.5 W Approx. 30 sec. ———————— Sleep Approx. 8.5 W Approx. 30 sec. ———————— Shutdown Approx. 1.6 W Approx. 30 sec. •...
Page 72) Document Management System] -> Communications Utility to activate the Communications Utility icon, and/or select [All Programs] -> [Panasonic] -> [Job Status Utility] -> [Job Status Utility] to activate the Job Status Utility icon. Select a Station (PC's Address)
Page 51
For ADF For i-ADF Press COPY key and FUNCTION key simultaneously COMPLETION NOTICE SELECT DESTINATION ABBR No. (2-digit) [01]SALES 10.74.252.66 Number of Copies (Max. 999) Copy Job Completed Notice will be displayed on your PC. Enter letter(s) (See page 70) ENTER LETTER(S) [06]SALES_3 [05]SALES_2...
Option Scanner ∗ Fax/Email ∗ General Copier Printer Settings Settings Settings Settings Settings ∗ DP-8020E/8020P only Input Key Operator Password (See page 13) General Copier Printer Settings for Settings for Settings for Key Operator Key Operator Key Operator General Settings: Changing the Initial Machine Modes ●...
Page 53
Copier Settings: Changing the Initial Copier Modes ● Default function of each copy mode. (See pages 57 and 58) For Key Operator: Original mode, Contrast, etc. (See pages 58 and 59) Printer Settings: Changing the Initial Printer Modes ● Default function of each print mode. (See page 59) For Key Operator: Job completion time, Page protection, Error page print,...
1:OFF / 2:DISPLAY DEPT. COUNTER Displays the Total Copy usage and copy limit of Consult your authorized the selected department. Panasonic dealer SORT-ROTATE Selects the rotate-sort mode. 1:OFF 1:OFF / 2:ON (Available for Letter size paper only) MANUAL ADD TONER Adds toner manually.
Page 55
DEPT. COUNTER MODE Monitors the copy usage of each department. Consult your 1:TOTAL COUNTER authorized 2:DEPT. COUNTER Panasonic dealer 3:DEPARTMENT LIST LANGUAGE PRIORITY Selects whether to enable the language 1:OFF selection menu to display when the machine comes out of the Energy Saver Mode, or when the RESET button is pressed once.
Page 56
Function ■ General Settings (For Key Operator) (Continued) Initial Modes Function Setting DNS SERVER ADDR. ∗ Selects whether to enable the DNS Server, and 2:VALID sets its settings for Internet Fax/Email Function. 1:INVALID 2:VALID <Sub-Function> 1:HOST NAME / 2:DOMAIN NAME / 3:PRI.
■ Copier Settings Initial Modes Function Setting MARGIN DEFAULT Selects the margin shift value. 1:LEFT 1:POSITION / 2:VALUE 10 mm <Sub-Function> 1:LEFT / 2:RIGHT / 3:TOP / 4:BOTTOM Procedure: Select "1:POSITION" and select a Margin position then, select "2:VALUE" and input a shift value with Keypad.
Initial Modes Function Setting TONER SAVE (T/P) Selects the Toner Save Level to use for the 1:NONE Text/Photo mode. 1:NONE / 2:LEVEL1 / 3:LEVEL2 TONER SAVE (PHOTO) Selects the Toner Save Level to use for the 1:NONE Photo mode. 1:NONE / 2:LEVEL1 / 3:LEVEL2 SADF DEFAULT Selects whether the Job Build and SADF Mode 1:OFF...
Function The following Parameter Settings require the input of the Key Operator Password: ■ Printer Settings (For Key Operator) Initial Modes Function Setting PRINTER SETTINGS Prints the printer settings. PRESS SET TO PRINT COMPLETION TIME Sets the job completion time setting. 180SEC 1-999SEC PAGE PROTECTION...
Paper Guide A Length Adjustment ex. Paper Tray-1 NOTE It is recommended that the paper guide B is fixed in place with a screw, consult your authorized Panasonic dealer for details on how to fasten the guide. Downloaded From ManualsPrinter.com Manuals...
Page 63
GENERAL PARAM. (0-9 ) 09 KEY OPERATOR MODE ENTER NO. OR ∨ ^ ENTER PASSWORD= 3-digit (See page 13) 9 (09 KEY OPERATOR MODE) TRAY-1 When setting LETTER ∨ ^ another Paper Tray, repeat steps 7 to 9 Select a Paper Size LETTER LETTER...
The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers for each department. (Maximum Number of Departments: 300) Contact your authorized Panasonic dealer to enable the Department Counter feature. FUNCTION MODE (1-2) ENTER NO. OR ∨...
Page 65
GENERAL PARAM. (0-9) 09 KEY OPERATOR MODE ENTER NO. ∨ ^ ENTER PASSWORD= 3-digit (See page 13) 9 (09 "KEY OPERATOR MODE") For Department Counter For ID (Identification) Code DEPT. CODE (1-300) DEPT. COUNTER ID CODE ENTER NO. OR ∨ ^ 001 123145 001 12345678 Department...
Function For Example ■ Network Settings When the Parameter No. 22 (DHCP DEFAULT) is set to “INVALID”, the Key Operator must Same procedure as administer the Network settings manually. steps 2 to 5 above. Enter these required Network Setting: Parameter No. 19 (TCP/IP ADDRESS), 20 (TCP/IP SUBNET MSK) and 21 (TCP/IP G/W ADDR.), in the same manner as shown in the following example.
Page 67
Select 19 KEY OPR. MODE (00-34) 22 DHCP DEFAULT ENTER NO. OR ∨ ^ 2:VALID (TCP/IP ADDRESS) :INVALID (4 times) 22 (DHCP DEFAULT) 20 TCP/IP SUBNET MSK 21 TCP/IP G/W ADDR. Input the Subnet Mask Input the Gateway same procedure as in Address same procedure step 6.
Function Combined Function Table Next Selections First Selections 1 ∗ 2 ∗ Book 2 Page N in 1 Sort/Rotate-Sort Non-Sort Zoom Edge Book Margin Image Repeat Centering Interrupt Manual Skyshot Digital Skyshot Double Exposure : Possible Combined Functions. : Unavailable Combined Functions. : Next Selection is Carried Out.
Accessories Components ■ The DP-8020E/8020P/8016P is a digital photocopier which can produce images with great clarity. Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and supplies. We hope you find that the wide ranging capabilities will make your office-place more productive and efficient.
Network Scanner Document Scanning ■ Document Scanning When Panasonic Document Management System is installed and configured on your For ADF PC, document(s) can be scanned from the machine to your PC. Direct Connection (with Crossover Cable, see page 76) For i-ADF ∗ ∗ ∗ ∗ ∗...
Page 71
Select a Station (PC's Address) ABBR ABBR No. (2-digit) ABBR [_ ] [01]SALES ENTER ABBR No. 10.74.252.66 DIRECTORY SEARCH Enter letter(s) ENTER LETTER(S) ENTER LETTER(S) [06]SALES_3 [05]SALES_2 10.74.252.66 [01]SALES 10.74.252.66 10.74.252.66 ONE- TOUCH* NOTE "ONE-TOUCH" is available when the optional Keyboard (DA- KB180) is installed.
Network Scanner Address Book ■ Adding your PC's IP Address If the Scanner Configuration is not set with the Communications Utility of Panasonic Document Management System software, setup the Communications Utility software by following the steps below. Right-Click "Panasonic Communications Utility"...
Page 73
Click "Add Device" if your PC address information is registered on the machines located on a different subnet. Click "OK". Click "Add". Click "OK". Enter the machine’s Device Name, and IP Address. Click "OK". Downloaded From ManualsPrinter.com Manuals...
Network Scanner Function ■ Scan Parameters (Scanner Settings) SEP-02-2006 04:28 FUNCTION (1-2) READY TO SCAN ENTER NO. OR ∨ ^ 1: SET MODE Refer to Function settings on page 61. ● Prints Scanner Settings List, SCAN PARAM (0-6) Sets Original Mode, ENTER NO.
Page 75
1:SET MODE ? SET MODE (1-2) 2:SCAN PARAMETERS ? PRESS SET TO SELECT ENTER NO. OR ∨ ^ PRESS SET TO SELECT 2:SELECT MODE? SELECT MODE (1-2) PRESS SET TO SELECT ENTER NO. OR ∨ ^ : Scan File Name : Compression For Compression 2:COMPRESSION ?
Power Switch (Machine Address into the Address your PC. (See page 70) and the PC). Book in the machine (see page 72) or into the Panasonic Document Management System software (refer to the enclosed CD). NOTE: ∗ If the Hard Disk Drive Unit (DA-HD18) is installed, see page 13.
Page 77
Turn On the Power Switch Input the Network Address (Machine and the PC). (Machine and your PC). ● IP and Gateway Address ∗ 192.168.0.1 (Machine) 192.168.0.2 (Your PC) Subnet Mask: 255.255.255.0 NOTE: (Machine & the PC) ∗ If you use the DHCP ●...
Problem Solving Troubleshooting Check Action Unit Does Not Operate Check if the Power Switch (Main Power Switch on the Right Side of the machine) is turned ON Does the display light? and if the power cord is plugged into the AC outlet.
Check Action Marked Copies Is the machine’s Platen Glass or Platen Sheet Clean the Platen Glass or Sheet. dirty? Cover the original with a sheet of white paper Is the original an OHP film or a dark original? before copying or lighten the exposure setting. If a dark verical line of Clean the Corona Wire of the Drum Unit.
Problem Solving Replacing the Battery/Set the Date and Time The machine has an internal battery (Product No.: CR2032) which maintains Turn the Power Switch on Battery Holder the date and time. the Right Side of the In the event the battery requires machine to the OFF replacement, the following message will position.
Page 81
Turn the Power Switch Battery Holder on the Right Side of the machine to the ON position. Used Reinstall the Battery Holder. “ ” side of battery should be Install 1 Screw. facing upwards. (Observe the polarity, see CAUTION! below) FUNCTION MODE (1-2) GENERAL PARAM.(0-9) ENTER NO.
Paper Feed Standard Paper Tray (550 sheets) + Sheet Bypass (50 Sheets) Optional Paper Trays (550 sheets x 3 ) (3rd and 4th Paper Trays are for DP-8020E/8020P ∗ only) Paper Weight Paper Tray: 16 - 24 lb (60 - 90 g/m...
Mass (Weight) DA-AS181: 11.0 lb (5.0 kg) DA-AR202: 20.5 lb (9.3 kg) ■ 2nd/4th Paper Tray (DA-DS184), 3rd Paper Tray (DA-DS185) (Option) (3rd, and 4th Paper Tray for DP-8020E/8020P ∗ ∗ ∗ ∗ ∗ only) Paper Size Invoice/Letter/Legal/Ledger Paper Weight 16 –...
Also referred as ADF Inverting Automatic Document DA-AR202 Also referred as i-ADF Feeder (For DP-8020E only) 4th Paper Tray (For DP-8020E/8020P ∗ only) 2nd/4th Paper Tray DA-DS184 3rd Paper Tray (For DP-8020E/8020P ∗ only) 3rd Paper Tray DA-DS185 Plain Stand...
Page 85
memo Downloaded From ManualsPrinter.com Manuals...
Page 86
IMPORTANT INFORMATION When requesting information, supplies or service always refer to the model and serial number of your machine. The model and serial number plate (Main Name Plate) is located on the rear side of machine. For your convenience, space is provided below to record information you may need in the future. Model No.
Page 88
PANASONIC MACHINE, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PANASONIC DIGITAL DOCUMENT COMPANY ASSUMES NO RISK AND SHALL NOT BE SUBJECT TO LIABILITY FOR ANY DAMAGE, INCLUDING, BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFITS SUSTAINED BY THE CUSTOMER IN CONNECTION WITH THE USE OR APPLICATION OF THIS PANASONIC MACHINE.