Relocating The Machine - Canon GP200 Service Manual
Hide thumbs
Also See for GP200:
- Installation instructions (4 pages) ,
- Online manual (877 pages) ,
- Service manual (458 pages)
Table of Contents
Advertisement
5. INSTALLATION
III. RELOCATING THE MACHINE
Perform the following work when the machine must be relocated after installation by truck or other
means of transportation:
1. Points to Note
If you have to move the copier placed on its pedestal from room to room, do not lift the copier with your
hands in the grips; such will separate the copier from its pedestal. Be sure to hold the pedestal when lift-
ing the machines.
2. Before Relocating the Machine
Step
Work
1
Remove the drum unit.
2
Fix the scanner in place.
3
Tape the charging assemblies
and the feeding assembly releas-
ing lever in place to prevent dis-
placement by vibration.
4
Tape the front door and the deliv-
ery assembly in place.
5
Place a single sheet of A3 copy
paper on the copyboard glass,
and tape the copyboard cover
(feeder) in place.
3. Lifting the Copier Off the Pedestal
Step
Work
1
Open the pedestal's right corner,
and release the guide (shift to the
right) used to join the pedestal
and the copier.
2
Hold the copier's grips, and lift
the copier upright so that the
pedestal's pin will slide off the
holes. (Work in a group of two.)
3
Lower the copier on the floor or
on a desk.
5–30
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Checks
Put the drum unit in a separate box for
transport.
Checks
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Remarks
- Quick Links:
- Names of Parts
Hide quick links:
Advertisement
Chapters
Table of Contents
