Replacing The Rom Dimm; (Image Processor Pcb) - Canon GP200 Service Manual

Hide thumbs Also See for GP200:

Table of Contents

4. MECHANICAL SYSTEM

2. Removing the LCD PCB and the

1) Disconnect the connector q, and remove the

six screws w; then, remove the control panel

Figure 4-803

2) Remove the four screws and three flat cables;

then, remove the LCD PCB r.

3) Remove the two screws, and remove the

switch PCB t; then, remove the four screws

and the two flat cables, and remove the CPU

Figure 4-804

Download service manual and resetter printer at http://printer1.blogspot.com

CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

C. Replacing the ROM DIMM

1. Removing the ROM DIMM

1) Turn OFF The main power switch.

2) Disconnect the power cord from the power

3) Remove the copyboard glass, lens cover, and

4) While opening the claw of the slot, lift the

ROM DIMM to remove.

Figure 4-805

Show Quick Links

Chapters

Table of Contents