Multifeeder Assembly - Canon GP200 Service Manual
Hide thumbs
Also See for GP200:
- Installation instructions (4 pages) ,
- Online manual (877 pages) ,
- Service manual (458 pages)
Table of Contents
Advertisement
4. MECHANICAL SYSTEM
B. Multifeeder Assembly
1. Removing the Multifeeder Unit
1) Open the multifeeder assembly q, and insert
a large flat-blade screwdriver into the top w of
the connector cover, and turn it to remove the
cover; then, disconnect the connector.
Figure 4-407
2) Close the multifeeder assembly, and open the
right door; then, pull out the rolls e from the
left and the right.
3
Figure 4-408
3) Remove the multifeeder assembly.
Reference:
When installing the multifeeder connector
cover, match the top first and push the bot-
tom in.
4–20
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
2. Removing the Multifeeder Pick-Up
Roller
1) Pull out the multifeeder rolls.
2) Detach the cable from the cable, and remove
the right door q.
2
1
3) Remove the snap-on bushing w, and shift the
roller shaft e in the direction of the arrow.
4) Remove the stop ring r, and remove the mul-
tifeeder pick-up roller t.
Caution:
Work carefully while paying attention to the
pin at the rear of the pick-up roller.
3
2
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
1
Figure 4-409
5
4
3
Figure 4-410
- Quick Links:
- Names of Parts
Hide quick links:
Advertisement
Chapters
Table of Contents
