1. GENERAL DESCRIPTION
4. Making Two-Sided Copies or
Overlay Copies
Using manual feeding mode, you can make
two-sided copies overlay copies.
Be sure to keep the following in mind when
making two-sided or overlay copying mode:
q Make sure that the side copied and the side to
be copied have the same orientation (i.e., do
not reverse rear and front) when turning over
the copy paper.
w Make sure that the copy paper is not moist.
e Make sure that the copy is not curled.
r After the first copying run, cool the copy paper
sufficiently and remove the curling before
starting the second copying run.
2
t Use 64 to 128 g/m
paper.
y Remove the curling before the second copy-
ing run for a post card or thick paper (128
2
g/m
).
1–18
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
5. Using ID Mode
In ID mode, you must enter a 4-digit ID num-
ber to make copies. As many as 100 ID numbers
may be stored, and you can check the count
(number of copies made) by number for control of
copying volume by group.
a. Setting the System Control Password
1) Select 'user mpde', 'custom common set-
tings', and then 'system settings password
setting' to set the system control password.
b. Storing ID Numbers
1) Set the system control password.
2) Select 'custom common settings' and 'DEPT.
ID MANAGEMENT' to enter the system con-
trol password.
3) Select 'yes' to 'DEPT. ID MANAGEMENT',
and store the appropriate group ID and ID
number for 'STORE DEPT. ID PASSWORD'.
c. Entering an ID Number
1) Press the 'ID' icon in the upper right corner of
the Basic screen.
2) Enter the appropriate 'ID' and 'password'.
d. Cleaning the Count (all ID numbers)
1) Select 'user mode', 'custom common set-
tings', and then 'DEPT. ID MANAGEMENT' to
enter the system control password.
2) On the 'DEPT. ID MANAGEMENT' screen
select 'ON' and then 'COPY TOTALS'; then,
press 'CLEAR ALL TOTALS'.
Note:
You cannot clear the counts individually.
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)