Canon GP200 Service Manual page 277
Hide thumbs
Also See for GP200:
- Installation instructions (4 pages) ,
- Online manual (877 pages) ,
- Service manual (458 pages)
Table of Contents
Advertisement
14. Adjusting the Fixing Film
Item
T-ROLLER FIX
• fixing tension roller fixing mode
(Use it to mechanically adjust
the pressure of the fixing film
drive roller.)
Execute it as part of adjust-
ment performed after replac-
ing the film.
FILM_INIT_ROTATE
• fixing film initial rotation mode
(Use it after replacement of
the fixing film or the fixing
assembly.)
FILM_COMEBACK
• fixing film displacement
recovery mode
(Use it if 'E007' is indicted when
the fixing film has become dis-
placed for some reason.)
ON-TIME
ONE CYCLE
FILM_SPEED
LOCATION from TOP
LEVEL
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
*4* FUNCTION 14 – > ( )
T-ROLLER FIX (OK:START)
FILM_INIT_ROTATE (OK:START)
FILM_COMEBACK (OK:START)
ON_TIME =xxxx (msec)
ONE CYCLE =xxxx (msec)
FILM_SPEED=xxxx[]
LOCATION from Top=xxxx (mm/10)
1 2 3 4 5 6 7 8 9
LEVEL
* * * * * * * * *
rear
+
In this mode, the fixing film is rotated idly with the
fixing tension roller being held in place after return-
ing the film to an appropriate position (same as in
FILMCOMEBACK). While the fixing film is rotated
idly, the speed of displacement to the rear/front of
the film is measured, and the result is indicated
under ' FILM SPEED' on the control panel.
In this mode, the fixing film will automatically stop at
a specific position, indicating the position under
'LOCATION from Top' and 'LEVEL' as it rotates.
In this mode, the film is returned to its proper posi-
tion. The operation ends when the film has returned
to the proper position or after a specific period of
time has passed. (The rough adjustment range is
not reached in 30 sec; or, the fine-adjustment range
is not reached in 60 sec.)
Indicates the period during which the fixing film sen-
sor has been ON.
Indicates the time taken by the fixing film to make a
complete rotation.
Indicates the measured film speed.
Indicates the position of the rear end of the fixing
film from the V-cut.
Indicates the position of the fixing film (4 or 5 is opti-
mum).
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3. OPERATIONS AND TIMING
CANCEL
JUMP
front
–
OK
Description
Reference
page
3–223
- Quick Links:
- Names of Parts
Hide quick links:
Advertisement
Chapters
Table of Contents
