Type
Paper stopper plate
override
Different number of
originals after jam
removal
Wrong number of origi-
nals
Original forced off
Wrong original size
Wrong original size or
mixed sizes in image
composition mode (See
Note 1.)
Not reset when mode
is changed
Note1:
To reset, remove the originals from the original tray and then open the RDF.
COPYRIGHT © 1996 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Sensor
Conditions
S7
The original has ridden over the
paper stopper plate when the origi-
nal was set.
S3
The number of originals on the orig-
inal tray changed as follows:
Number of
originals copied
See Supplement.
S3
The last original cannot be detected
because the re-circulating lever
does not fall through the original
tray.
Reference:
Normally, the original tray holds
50 sheets of A5, STMT, A4, B5,
or LTR, or 25 sheets of A3, B4,
11"x17", or LGL.
S13
The re-circulating lever dropped
through the original tray while an
original was being processed.
S3
The original that has been picked
up is of a non-default size.
S3
q The original is of a size that
image composition mode does
not accommodate.
w The original is of a size different
from the first original.
—
q When executing fax mode with-
out resetting after copying mode.
w When making a copy in the
middle of fax operation or when
making a copy without resetting
after fax mode.
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3. OPERATIONS AND TIMING
Stops immediately
upon detection.
Stops immediately
upon detection.
Number of originals
>
set on tray
Stops after counting
the 100th original.
Stops immediately
upon detection.
Stops immediately
upon detection.
Stops immediately
upon detection.
See Supplement.
Stops operation im-
mediately upon
detection.
RF operation
Code
05H
11H
12H
13H
14H
15H
21H
3–169