When you exchange IC and Transistor with a heat sink, apply silicon grease on the contact section of the heat sink. Befor applying new silicon grease, remove all the old silicon grease. (Old grease may cause damages to the IC and Transistor.) 13A25/13A25C A1-1...
When soldering or unsoldering, completely remove all of the solder from the pins or solder area, and be sure to heat the soldering points with the lead free solder until it melts sufficiently. Recommendations Recommended lead free solder composition is Sn-3.0Ag-0.5Cu. A1-2 13A25/13A25C...
GENERAL SPECIFICATIONS CRT Size / Visual Size 13 inch / 335.4mmV System CRT Type Normal Deflection degree Magnetic Field BV/BH +0.45G/0.18G Color System NTSC Speaker 1Speaker Position Bottom Size 3 Inch Impedance Sound Output 1.0 W 10%(Typical) 0.8 W NTSC3.58+4.43 /PAL60Hz Tuning Broadcasting System System M...
Page 6
GENERAL SPECIFICATIONS On Screen Menu Display Menu Type Character Picture Contrast Brightness Color Tint Sharpness Audio Bass Treble Balance BBE On/Off Stable Sound On/Off CH Set Up TV/CABLE(CATV) Auto CH Memory Add/ Delete Language V-chip Lock On Timer CH Label Favorite CH Color Stream DVD/DTV Control Level...
Page 7
GENERAL SPECIFICATIONS G-10 Remote Unit RC-EH Control Glow in Dark Remocon Format Toshiba Custom Code 40-BF h Power Source Voltage(D.C) UM size x pcs UM-4 x 2 pcs Total Keys Keys Keys Power CH Up CH Down Volume Up Volume Down...
Page 8
GENERAL SPECIFICATIONS G-11 Features Auto Degauss Auto Shut Off Canal+ CATV Anti-theft Rental Memory(Last CH) Memory(Last Volume) V-Chip Type USA,ORION Type Auto Search CH Allocation Channel Lock Just Clock Function Game Position CH Label VM Circuit Full OSD Premiere Comb Filter Lines Auto CH Memory Hotel Lock...
Page 9
GENERAL SPECIFICATIONS G-13 Interface Switch Front Power System Select Main Power SW Sub Power Channel Up/Reset Channel Down/Enter Volume Up/Set Up Volume Down/Set Down MENU=Volume Up+Volume Down Rear AC/DC TV/CATV Selector Degauss Main Power SW Indicator Power Stand-by On Timer Terminals Front Video Input...
Page 10
54 W at AC 120 V 60 Hz Stand by (at AC) W at AC 120 V 60 Hz Per Year kWh/Year Protector Power Fuse Regulation Safety Radiation X-Radiation Temperature Operation +5oC ~ +40oC Storage -20oC ~ +60oC Operating Humidity Less than 80% RH A3-6 13A25C...
Page 11
Game Timer Sleep Timer Sound Mute V-chip Rating OSD Language English French Spanish Clock and Sleep Timer Max Time 120 Min Timer Step On Timer Program(On Timer ) Wake Up Timer Timer Back-up (at Power Off Mode) more than A3-7 13A25C...
Page 12
Volume Up Volume Down TV/Caption/Text CH1/CH2 TV/Video(TV/AV) CH RTN/CH ENT(Quick View) Sleep RE Call(Call) Reset Menu Enter Mute Exit MTS(Audio Select) Set + Set - Multi Brand Keys CH Up(VCR) CH Down(VCR) Pause/Still TV/VCR(VCR) Code Play Stop Cable A3-8 13A25C...
Page 13
Dew/AHC Caution Sheet AC Plug Adapter Quick Set-up Sheet Battery UM size x pcs UM-4 x 2 pcs OEM Brand AC Cord AV Cord (2Pin-1Pin) Registration Card (NDL Card) ESP Card 300 ohm to 75 ohm Antenna Adapter A3-9 13A25C...
Page 14
Natural Dropping At 1 Corner / 3 Drop Test Edges / 6 Surfaces Height (cm) Container Stuffing Sets/40' container G-17 Cabinet Material Cabinet Cabinet Front PS 94V0 DECABROM Cabinet Rear PS 94V0 DECABROM Non-Halogen Demand Eyelet Demand G-18 Environment Pb-free Soldering Parts Specificat A3-10 13A25C...
Flip up the sides of the Rubber Cap in the direction of the arrow and remove one side of the support. (Refer to Fig. 1-2.) Rubber Cap Support Fig. 1-5 Support Confirm that the Support is securely connected. Fig. 1-2 Put on the Rubber Cap without moving any parts. B1-1 13A25/13A25C...
NOTE Do not move the Braided Shield Wire in the vertical direction towards the IC pattern. Blower type IC desoldering machine Braided Shield Wire Soldering Iron IC pattern Fig. 2-4 Fig. 2-2 B2-1 13A25/13A25C...
Page 17
Fig. 2-6 Absorb the solder left on the lead using the Braided Shield Wire. (Refer to Fig. 2-7.) NOTE Do not absorb the solder to excess. Soldering Iron Braided Shield Wire Fig. 2-7 B2-2 13A25/13A25C...
While holding down VOLUME button on front cabinet, press key (1) on remote control for more than 2 seconds. After the finishing of the initializing of shipping, the unit will turn off automatically. The unit will now have the correct DATA for the new MEMORY IC. 13A25/13A25C...
Press the TV/VIDEO button on the remote control to set R.DRIVE TINT to the AV mode. Then perform the above adjustments B.DRIVE SHARPNESS 2~7. R.BIAS FM LEVEL G.BIAS LEVEL B.BIAS SEPARATION 1 BRIGHT CENT SEPARATION 2 BRIGHT MAX TEST MONO BRIGHT MIN TEST STEREO Fig. 1-2 13A25/13A25C...
Page 20
Press the VOL.UP/DOWN button on the remote control control until the horizontal line becomes fit to the unitil the contrast step No. becomes "52". notch of the shadow mask. (Refer to Fig. 2-3) Receive a broadcast and check if the picture is normal. 13A25/13A25C...
Page 21
Please check if the fixed values of the each adjustment items are set correctly referring below. (RF/AV) STEP NO. NO. FUNCTION STEP NO. FUNCTION COLOR MIN H VCO SHARPNESS BRIGHT MAX FM LEVEL BRIGHT MIN LEVEL CONT CENT SEPARATION 1 CONT MIN SEPARATION 2 COLOR MAX 13A25/13A25C...
Confirm red and blue colors. Adjust the slant of the deflection yoke while watching the WEDGE screen, then tighten the fixing screw. DEFLECTION YOKE WEDGE POSITION DEFLECTION YOKE SCREW Fig. 3-2-b MAGNET SCREW PURITY MAGNETS 6 POLE MAGNETS 4 POLE MAGNETS Fig. 3-1 13A25/13A25C...
Page 23
ELECTRICAL ADJUSTMENTS 4. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (WIRING CONNECTION) CRT PCB CP806 TP022 FB401 TU001 CP803A TP023 CP802B CP801 DEGAUSS COIL CP502 S501B S501A CD501 AC IN CD101A SPEAKER CD101B MAIN PCB 13A25/13A25C...
P. FAIL V-OUT IC IC501 IC401 LA78040N-E LTV-817M-VB T502 Q507 MEMORY IC FEED BACK PUMP UP FEED BACK SDA SCL IC199 BR24L02F-WE2 Q502 DEGAUSS COIL L503 BUFFER D501~D504 Q501 FB401 RECTIFIER POWER AMP Q503 PROTECT DRV. L501 F501 AC IN 13A25/13A25C...
Page 27
WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST DANGEREUSES AN POINT DE VUE SECURITE B.SIGNAL DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. DEFLECTION SIGNAL DANS LA NOMENCLATURE DES PIECES TUNER VIDEO SIGNAL 13A25/13A25C...
Page 28
WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST THE ALUMI ELECTROLYTIC CAPACITOR MARKED NP WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES IS NON POLAR ONE. DANS LA NOMENCLATURE DES PIECES 13A25/13A25C...
Page 29
THE ALUMI ELECTROLYTIC CAPACITOR MARKED NP 560 1/2W R445 IS NON POLAR ONE. B.SIGNAL 180K 1/4W DEFLECTION SIGNAL PCB010 ATTENTION :LES PIECES REPAREES PAR UN ETANT CMD009 DANGEREUSES AN POINT DE VUE SECURITE N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES 13A25/13A25C...
Page 30
OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST AUDIO SIGNAL DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. DANS LA NOMENCLATURE DES PIECES 13A25/13A25C...
WAVEFORMS 16 50V 20µs/div SOUND/AV 0.5V 1ms/div 1V 1ms/div 200mV 500µs/div 20 500mV 20µs/div NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. 13A25/31A25C...