Upnp Setup - D-Link DSR-150 User Manual
Wireless n services router
Hide thumbs
Also See for DSR-150:
- User manual ,
- Reference manual (129 pages) ,
- Quick installation manual (57 pages)
Table of Contents
Advertisement
Section 4 - LAN Configuration
Path: Network > LAN > UPnP
Universal Plug and Play (UPnP) is a feature that allows the router to discover devices on the network that can
communicate with the router and allow for auto-configuration. If a network device is detected by UPnP, the
router can open internal or external ports for the traffic protocol required by that network device. If disabled, the
router will not allow for automatic device configuration and you may have to manually open/forward ports to
allow applications to work.
To configure the UPnP settings:
1. Click Network > LAN > UPnP.
2. Toggle Activate UPnP to On.
3. Select a VLAN from the LAN Segment drop-down menu.
4. Enter a value for Advertisement Period. This is the frequency that the router broadcasts UPnP information
over the network. A large value will minimize network traffic but cause delays in identifying new UPnP
devices to the network.
5. Enter a value for Advertisement Time to Live. This is the number of steps a packet is allowed to propagate
before being discarded. Small values will limit the UPnP broadcast range. A default of 4 is typical for
networks with a few number of switches.
6. Click Save.
7. Your entry will be displayed in the UPnP Port Map List. To edit or delete, right-click an entry and select
the action from the menu. Repeat steps 2-6 to add multiple entries.
D-Link DSR-Series User Manual
UPnP Setup
23
- Quick Links:
- Log in to the Web Ui
- Port Forwarding
Hide quick links:
Advertisement
Table of Contents
