Table of Contents
Advertisement
Quick Links
Manuals for this recorder are prepared in two parts.
Section 1 : Before Use
Section 2 : Operation
Before operating this product, please read the instructions carefully and
save this manual for future use.
S0909K0 -M
Printed in Japan
Operating Instructions
Memory Card Video Recorder
AG-CPD20P
Model No.
(This Manual)
(for operations using the remote
control panel, etc.) (PDF)
Section 1 : Before Use
Car Use only
ENGLISH
VQT2C58
Advertisement
Table of Contents
Related Manuals for Panasonic AG-CPD20P
Summary of Contents for Panasonic AG-CPD20P
-
Page 1: Operating Instructions
Operating Instructions Section 1 : Before Use Memory Card Video Recorder AG-CPD20P Model No. Car Use only Manuals for this recorder are prepared in two parts. Section 1 : Before Use (This Manual) Section 2 : Operation (for operations using the remote control panel, etc.) (PDF) -
Page 2: Read This First
Read this first! WARNING: • To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. • To reduce the risk of fire or electric shock, keep this equipment away from all liquids. Use and store only in locations which are not exposed to the risk of dripping or splashing liquids, and do not place any liquid containers on top of the equipment. - Page 3 Read this first! (continued) CAUTION: In order to maintain adequate ventilation, do not install or place this unit in a book case, built-in cabinet or any other confined space. To prevent risk of electric shock or fire hazard due to overheating, ensure that curtains and any other materials do not obstruct the ventilation.
-
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS (1) Read these instructions. (2) Keep these instructions. (3) Heed all warnings. (4) Follow all instructions. (5) Do not use this equipment near water. (6) Clean only with a dry cloth. (7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. -
Page 5: Table Of Contents
GPL and LGPL can be found in the GPL and LGPL sections of the Operating Instructions: Section 2. To obtain the source codes, go to the following home page. https://eww.pavc.panasonic.co.jp/pro-av/ The manufacturer asks users to refrain from directing inquiries concerning the source codes they have obtained and other details to its representatives. -
Page 6: Functions Of This Recorder
Functions of This Recorder An AG-CPD20P is a vehicle video recorder using SDHC Memory Cards. A separately sold video camera, commercially available radar gun, and microphones can be connected to the recorder. The recorder can be controlled using a separately sold remote control panel, or software installed on a personal computer. -
Page 7: Included Accessories
Included Accessories Key .............2 Options Remote Control Panel PC Applications (free software) (AG-RCP30P) Front End Application (AG-JJLFE20P) Color Camera (AG-CK10P) Back End Application (AG-JJLBE20P) Cable Kit (AG-CR13P) Power cable Trigger cable GPS antenna + Antenna mounting plate About Manuals of This Recorder Manuals for this recorder are prepared in two parts: “Section 1: Before Use”... -
Page 8: Before Use
• For details on how to run the PC application, see the Operating Instructions of the PC application. In no event will Panasonic be liable for any damages, including any incidental • or consequential damages, stemming from a failure to record data or from lost settings or data. - Page 9 Before Use (continued) About the Internal Clock Confirming the Time The internal clock is set at the time of factory default. Check the time before using, and reset the clock if necessary. (Refer to “Date/Time” in Section 2: Operation.) Note: To use GPS, connect the GPS antenna (included in the separately sold Cable Kit) to the...
-
Page 10: Notes On Handling
Web site: or SDHC Memory Cards. • Do not insert foreign objects into http://panasonic.jp/support/global/ the openings of any devices. cs/sd/download/sd_formatter.html • Do not attempt to modify the recorder or SDHC Memory Cards. -
Page 11: Control Reference Guide
Control Reference Guide Front panel (1) less than 30 minutes, the lamp starts REC button ( ) flashing (refer to “Indicator Lamps Starts recording of video and sound and Recorder Status” in Section 2: to an SDHC Memory Card. Operation). STOP button ( ) READY lamp Stops recording. - Page 12 Control Reference Guide (continued) Front panel (2) USB connector A commercially available USB memory device can be connected for use as external memory. Not all USB memory devices may be recognized. USB connector cover Close the cover to prevent foreign objects from getting into the connector when a USB memory device is not to be used.
- Page 13 Control Reference Guide (continued) Rear panel (1) CAMERA 1 connector AUDIO OUT (white) connector Connect the separately sold Color (Pin jack) Camera using the cable attached to This is a line level signal output. the Camera. Accepts connection of the cable attached to the separately sold Remote Control Panel.
- Page 14 Control Reference Guide (continued) Rear panel (2) AUDIO IN 1 (black), 2 (red), DC IN connector 3 (black), and 4 (black) This connector accepts power from connectors (Pin jack) the vehicle battery. These are line or microphone level Connect the power cable here signal inputs.
- Page 15 Control Reference Guide (continued) Mounting bracket The recorder can be mounted turned by 90° in a center console or trunk. The figure below is an example of mounting in a center console. (Factory default setting) For trunk mounting, remove the screw to remove the mounting bracket. Rotate the mounting bracket 90°...
-
Page 16: Connections
Connections • Be sure to consult your supplier and request installation and connection. • Connect the red (BATT) and white (SIGNAL) wires of the power cable via a fuse (7.5 A) having UL Listing. (The power cable is included in the separately sold Cable Kit.) •... - Page 17 Connections (continued) PC (commercially available, PC (commercially available, for Back End Application) for Front End Application) For using the LPR mode, use the [VIDEO OUT 1] connector. (Refer to “Setting LPR LAN cable mode” in Section 2: LAN cable (commercially Operation.) (commercially available) available)
-
Page 18: Sdhc Memory Card Insertion And Removal
SDHC Memory Card Insertion and Removal Do not insert or remove an SDHC Memory Card when another SDHC Memory Card is being accessed (while the [BUSY] lamp is lit or blinking). Otherwise the SDHC Memory Card may be damaged or SDHC Memory Card data may be corrupted. -
Page 19: Removing An Sdhc Memory Card
SDHC Memory Card Insertion and Removal (continued) (3) Close the SDHC Memory Card Note: The [BUSY] lamp blinks for a few slot cover. seconds when the SDHC Memory Return the SDHC Memory Card Card slot cover is opened. Make slot cover to its original closed sure that the blinking has stopped position and press the section before removing an SDHC Memory... -
Page 20: Turning The Recorder On And Off
Turning the Recorder On and Off Recorder power is supplied from the vehicle’s battery. Turn the vehicle’s ignition switch to ON or ACC. Power to the recorder is turned on. If the Remote Control Panel is connected, its power is also turned Turn the vehicle’s ignition switch to LOCK (OFF). -
Page 21: Connector Signals
Connector Signals [CAMERA 1] connector Signal (male) number N.C. GND (SHIELD) V_OUT GND (V_OUT) BL_L GND (TxD/RxD) AUTO_ZOOM_L REC_L GND (DC_IN) REC_LED_L DC_IN GND (SHIELD) N.C. GND (SHIELD) [DC IN] connector Signal Cable color (male) number Black GND ( ) BATT ( ) 12V/24V ∗... - Page 22 Connector signals (continued) [GPIO] connector (female) Signal Cable color number Black/White N.C. ― GPI 13 Pink GPI 14 Light Green GPI 15 Brown/White GPI 16 Orange/White Trigger cable (included in the separately sold Cable Kit) (DIGITAL) Green/Black GPO 2 Green/White Black GPI 1 Brown...
- Page 23 Connector signals (continued) [CONTROL PANEL] connector Signal (male) number N.C. N.C. DC_IN GND (DC_IN) SOUT_P SOUT_N SIN_P SIN_N GND (DIGITAL) GND (FG)
-
Page 24: Specifications
Specifications Dimensions (W x H x D) Power requirements: (excluding protrusions and recorder 12 V DC / 24 V DC mounting brackets) Input current: 2.7 A (at 12 V DC) 178 mm x 87 mm x 155 mm 1.3 A (at 24 V DC) (7 inches x 3- inches x 6- inches) - Page 25 Specifications (continued) • CAMERA 1 connector x 1 Video 16-pin, for AG-CK10P Inputs: • CONTROL PANEL connector x 1 CAMERA 1 x 1 10-pin, for AG-RCP30P 1.0 V [P-P], 75 Ω, unbalanced CAMERA 2-6 (Pin jack) x 5 • LAN connector x 2 1.0 V [P-P], 75 Ω, unbalanced RJ-45, connected to a PC Outputs:...
-
Page 26: Worldwide Product Warranties
"Panasonic") will repair the products listed below with new or Programs will be uninterrupted or error free. Panasonic shall rebuilt parts, free of charge in the U.S.A. or other Panasonic have no obligation for any defects in the disk(s) or other... - Page 27 MEMO...
- Page 28 Panasonic Computer Solutions Company Panasonic Computer Solutions Company 50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094 © 2009...