Canon iR5000 Service Manual page 281

Hide thumbs Also See for iR5000:

Table of Contents

CHAPTER 4 IMAGE FORMATION SYSTEM

7) Cut off the excess of the charging wire

with nippers.

8) Pick the end of the charging wire ten-

sion spring with tweezers, and hook it

on the charging power supply electrode.

In the case of the pre-transfer charging

assembly, hook the spring on the pin at

Make sure of the following:

• The charging wire must not

be bent or twisted.

• The charging wire must be

fitted in the V-groove of the

charging wire positioner.

9) Attach a cushoin in front of the charg-

ing wire. (This does not apply to the

primary charging assembly.)

10) Mount the shielding plate (left, right).

For other charging assemblies,

mount the two lids.

11) Mount the wire cleaner. At this time,

pay attention to make sure that the wire

cleaner is oriented correctly.

12) Wipe the charging wire with lint-free

paper moistened with alcohol.

2000 2000 2000 2000

CANON iR5000/iR6000 REV.0 JULY 2000

Show Quick Links

Chapters

Table of Contents