For Wireless Network Interface Users (For Mac Os ® X 10.2.4 Or Greater) In Infrastructure Mode - Brother MFC-7840W Quick Setup Manual
Hide thumbs
Also See for MFC-7840W:
- User manual (192 pages) ,
- Network user's manual (151 pages) ,
- Quick setup manual (52 pages)
Table of Contents
Advertisement
STEP 2
Installing the Driver & Software
For Wireless Network Interface Users (For Mac OS
6
greater) in infrastructure mode
Connecting your wireless machine and wireless network together and
installing the printer driver in infrastructure mode
First you must configure the wireless network settings of your machine to communicate with your network access
point (router). After the machine is configured to communicate with your access point (router) computers on your
network will have access to the machine. To use the machine from these computers, you will need to install the
MFL-Pro Suite. The following steps will guide you through the configuration and installation process.
To achieve optimum results with normal every day document printing, place the Brother machine as close to the
network access point (router) as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large graphics, you
may want to consider choosing wired Ethernet for a faster data transfer, or USB for the fastest throughput speed.
Although the MFC can be used in both a wired and wireless network, only one of the connection methods can be
used at a time.
Important
The following instructions will offer two methods for installing your Brother machine in a wireless
network environment. Both methods are for infrastructure mode, using a wireless router or access
point that uses DHCP to assign IP addresses. If your wireless router/access point supports
SecureEasySetup™, Wi-Fi Protected Setup™ or AOSS™ follow the steps on page 39 Using the
SecureEasySetup™, Wi-Fi Protected Setup™ or AOSS™ software to configure your machine for a
wireless network (one push-mode). If your wireless router/access point does not support
SecureEasySetup™
Wizard from the control panel LAN menu for wireless network configuration (Infrastructure Mode). To
set up your machine in any other wireless environment (Ad-hoc mode) you can find instructions in the
Network User's Guide on the CD-ROM.
You can view the Network User's Guide by following the instructions below.
1 Turn on your Macintosh
2 Double-click the Documentation.
3 Double-click your language folder.
4 Double-click the top page file in HTML format.
5 Double-click the NETWORK USER'S GUIDE.
Note
• If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation.
• If you are using personal firewall software (e.g. Windows
print, restart your personal firewall software.
34
Wi-Fi Protected Setup™
,
®
. Insert the Brother CD-ROM into your CD-ROM drive.
follow the steps on page 36 Using the Setup
or AOSS™
®
Firewall), disable it. Once you are sure that you can
®
Macintosh
®
X 10.2.4 or
Advertisement
Table of Contents
