Model shown is KX-TG8622. Before initial use, see “Getting Started” on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. This unit is compatible with Caller ID. You must subscribe to the appropriate service offered by your service provider/telephone company.
Introduction Expanding your phone system You can expand your phone system by Handset(optional) : KX-TGA860AZ registering optional handsets (6 max.) to a single base unit. L Optional handsets may be a different colour from that of the supplied handsets.
Important Information L Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or For your safety placed under heavy objects. L It is advised not to use the equipment at a To prevent severe injury and loss of life/ refuelling point.
Page 4
Important Information L Use caution when installing or modifying L To minimise the possibility of lightning telephone lines. damage, when you know that a thunderstorm is coming, we recommend L The AC adaptor is used as the main that you: disconnect device.
Base unit location/avoiding noise objects such as wire fences, etc. The base unit and other compatible Panasonic L Operating the product near electrical units use radio waves to communicate with appliances may cause interference. Move each other.
Trademarks ® The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under licence. All other trademarks identified herein are the property of their respective owners.
Page 7
Getting Started Setting up (for New Zealand) ■ Base unit Connections “Click” L Use only the supplied Panasonic AC adaptor PNLV226E. adaptor PNLV226AL Use only the supplied telephone line cord. (for Australia) ■ Base unit To single-line telephone socket “Click”...
Getting Started Battery installation L USE ONLY Ni-MH batteries AAA (R03) size. L Do NOT use Alkaline/Manganese/Ni- Cd batteries. L Confirm correct polarities (S, T). Rechargeable Ni-MH ONLY L When the date and time setting is displayed, see page 15. Battery charging Charge for about 7 hours.
L Use the supplied rechargeable L Even after the batteries are fully batteries. For replacement, we charged, the handset can be left on recommend using the Panasonic the charger without any ill effect on the rechargeable batteries noted on page batteries.
Page 10
Getting Started K Charge contacts Controls ■ Control type A Soft keys The handset features 3 soft keys. By Handset pressing a soft key, you can select the feature shown directly above it on the display. B Navigator key – {^}, {V}, {<}, or {>}: Scroll through various lists and items.
Making/Answering Calls indicator flashes. To cancel, press {ic}. Making calls Lift the handset and dial the phone Answering calls number. L To correct a digit, press ^. When a call is being received, the ringer indicator flashes rapidly. Press {C} or ]. Lift the handset and press {C} or When you finish talking, press {s} when the unit rings.
Phonebook Note for New Zealand: Handset phonebook ●Your service provider/telephone company may charge you for a local call The phonebook allows you to make calls if the number dialled has the area code without having to dial manually. You can prefix included.
Page 14
Phonebook Searching by query Searching by first character You can narrow down the search to enter n (left soft key) the first characters of a name. L Change the character entry mode n (left soft key) s * if necessary: To search for the name, enter the b s {r}: “Character Set”...
Programming {r}: Select a base unit number. s Registering a unit L This number is used by the handset as a reference only. Operating additional units Base unit: Press and hold {x} for about 5 Additional handsets seconds. (No registration tone) Up to 6 handsets can be registered to a L If all registered handsets start single base unit.
Page 16
Programming Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. 1 (middle soft key) (131 L All handsets registered to the base unit are displayed.
Caller ID Service L If the unit is connected to a PBX Using Caller ID service system, caller information may not be Important: properly received. Contact your PBX L This unit is Caller ID compatible. To use supplier. Caller ID features (such as displaying caller phone numbers), you must subscribe to a Caller ID service.
Caller ID Service For Caller ID Type II users Caller list When you receive a 2nd call during a conversation, you will hear a signal tone following the call waiting tone and the Important: conversation will be interrupted or muted L Only 1 person can access the caller for a short period of time.
Erasing selected caller information {<} (y) {r}: Select the desired entry. W s {r}: “Yes” s M s {ic} Erasing all caller information {<} (y) W s {r}: “Yes” s M s {ic} Storing caller information to the phonebook {<} (y) {r}: Select the desired entry.
Answering System Listening to messages Answering system using the handset The answering system can answer and record calls for you when you are When new messages have been unavailable to answer the phone. recorded, K is displayed on the handset with the total number of new Turning the answering messages.
Using Bluetooth devices 1 (middle soft key) (618 s Using Bluetooth Handset: devices 1 To copy from a cellular phone after registering: A handset is Bluetooth wireless {r}: “Mobile Phone” s M technology compatible. 2 To copy from a registered By using with other Bluetooth devices cellular phone: such as a cellular phone and headset,...
10 m. Changing the Bluetooth PIN (Personal Identification Number) Panasonic Ni-MH battery The PIN is used to register cellular performance during use of a phone. The default PIN is “0000”. To Bluetooth headset...
Page 23
Using Bluetooth devices L Refer to your headset operating Operating a Bluetooth instructions. wireless headset Handset: 1 (middle soft key) (621 Making calls Enter your headset PIN. After dialling the phone number using L Typically, default PIN is “0000”. the handset, you can operate the call Refer to your headset operating with your headset.
6) Damage to the product caused by accident, misuse or Act of God. 7) Repairs when the product has been dismantled, repaired, modified or serviced by other than a Panasonic Authorised Dealer authorised to service that type of product. IF YOUR PANASONIC PRODUCT FAILS WITHIN THE...